3Custom Function SettingsN

C.Fn III -3 AF point selection method

0:Normal

Press the <S> button and use <9> to select the AF point.

1:Multi-controller direct

Without pressing the <S> button first, you can just use the <9> to select the desired AF point. Pressing the <S> button will set it to automatic AF point selection.

2:Quick Control Dial direct

Without pressing the <S> button first, you can just use the <5> to select the desired AF point. By holding down the <S> button and turning the <6> dial, you can set the exposure compensation.

C.Fn III -4 Superimposed display

0:On

1:Off

The AF point in the viewfinder will not flash in red. Recommended when it is bothersome to see it light up.

The AF point will still light when you select it.

C.Fn III -5 AF-assist beam firing

The AF-assist beam can be emitted by the camera’s built-in flash or by the external, EOS-dedicated Speedlite.

0:Enable

1:Disable

AF-assist beam not emitted.

2:Only external flash emits

If an external, EOS-dedicated Speedlite is attached, it will emit the AF- assist beam when necessary. The camera’s built-in flash will not emit the AF-assist beam.

If the external, EOS-dedicated Speedlite’s [AF-assist beam firing] Custom Function is set to [Disabled], the Speedlite will not emit the AF-assist beam even if the camera’s C.Fn III -5-0/2 is set.

159