Canon 40D, EOS40D28135, EOS40DBODY dTransferring Images to a Personal Computer, EOS Utility, EOS Utility, Preparation for Image Transfer, 2 Set the camera’s power switch to <1

dTransferring Images to a Personal Computer

Before connecting the camera to the personal computer, be sure to first install the EOS DIGITAL Solution Disk software (in the CD-ROM provided with the camera) in the personal computer.

Preparation for Image Transfer 1 Connect the camera to the personal computer.

Turn off the camera and use the interface cable that came with the camera.

When connecting the cable plug to the camera’s <D> terminal, the cable plug’s <D> icon must face the front side of the camera.

To the personal computer’s USB port, connect the plug on other end of the cable.

2 Set the camera’s power switch to <1>.

When the program selection screen appears on the personal computer, select [EOS Utility].

When the camera model selection screen appears, select your camera’s model.

XThe [EOS Utility] screen will appear on the computer, and the direct transfer screen will appear on the camera’s LCD monitor.

Shooting will be disabled while the direct transfer screen is displayed.

If the [EOS Utility] screen does not appear, see “Software Instruction Manual” in the CD-ROM.

Before disconnecting the cable, turn off the camera first and pull out the cable by grasping the plug (instead of the cord).

148