Bulb Exposures

Using the Eyepiece Cover

If you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this, use the eyepiece cover attached to the camera strap.

1

2

Remove the eyecup.

From the bottom of the eyecup, push it upward.

Attaching the Eyepiece Cover.

Slide the eyepiece cover down into the eyepiece groove to attach it.

Connecting the Remote Switch

You can connect Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (both sold separately) or any EOS accessory equipped with an N3-type terminal to the camera and shoot with it.

To operate the accessory, refer to its instruction manual.

1Open the terminal cover.2 Connect the plug to the remote control terminal.

Connect the plug as shown in the illustration.

To disconnect the plug, grasp the plug’s silver part and pull out.

97