
Adjusting the Flash Output
In D mode, you can choose 3 levels of flash output.
Set the mode dial to D.
Choose the flash output level.
zAfter pressing the m button, press the op buttons to choose X.
Complete the setting.
zPress the qrbuttons or turn the 5dial to
choose the flash output level, then press the m button.
XOnce set, Xwill appear on the screen.
• You can also set the flash output level by pressing the n button to choose [Flash Control] (p. 99) in the 4 tab, then choose [Flash Output] and press the qr buttons to choose a setting.
•In M and B modes, you can set the flash output level if you choose [Flash Control] in the 4 tab, then set [Flash Mode] to [Manual].
•If you hold down the hbutton for more than 1 second, the setting screen will appear. If you press the hbutton then immediately press the n button when the flash is raised, the setting screen will appear.
105