Trimming
You can cut out a portion of a recorded image and save it as a new image file.
Choose [Trimming].
zPress the nbutton to choose [Trimming] in the 1tab, then press the m button.
Choose an image.
Trimming Area
Trimming Area Display
Recorded pixels after trimming
zPress the qrbuttons or turn the 5dial to choose an image, then press the mbutton.
Adjust the trimming area.
XA frame will appear around the portion of the image to be trimmed.
XThe original image will display in the upper left and the trimmed image will display in the lower right.
zMove the zoom lever to change the frame size.
zPress the opqr buttons to move the frame.
zPress the l button to change the frame orientation.
zIn an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be
used for trimming. You can switch between frames by turning the 5 dial.
zPress the m button.
Save as a new image and display.
zFollow Steps 4 and 5 on p. 139.
•Images recorded at a pixel setting of 
(p. 57), or images resized to 
(p. 139) cannot be edited.
•Images that can be trimmed will have the same width and height ratio after trimming.
•The number of recorded pixels in a trimmed image will be smaller than before trimming.
•Movies cannot be edited.
140