Checking the Focus
Jump by 
and 
Images
zIn single image playback, press the d button, then press the op buttons to choose a jump method.
zIf you press the qr buttons, the display will advance to the image that is the chosen number of images away.
zPress the nbutton to restore single image playback.
Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame to check the focus.
Press the lbutton to switch to the focus check display (p. 40).
XA white frame will appear where the AF frame was when the focus was set.
XA gray frame will appear on a face detected during playback.
XThe area within the orange frame appears magnified.
Switch frames.
zMove the zoom lever toward konce.
XThe screen shown on the left will appear.
zPress the mbutton to move to a different frame when multiple frames appear.
Change the magnification level or location.
zUse the zoom lever to change the display size, and the opqrbuttons to change the display position while checking the focus.
zPress the nbutton to reset the display to Step 1.
123