Using an Eye-Fi Card
Checking Connection Information
You can check the Eye-Fi card’s access point SSID, or connection status.
Choose [Connection info].
zPress the nbutton to choose [Eye-Fi Settings] in the 3tab, then press the m button.
zPress the opbuttons or turn the 5dial
to choose [Connection info], then press the
mbutton.
XThe connection info screen will appear.
Disabling Eye-Fi Transfer
You can set the card to disable Eye-Fi transfer.
Choose [Disable] in [Eye-Fi trans.].
zress the nbutton to choose [Eye-Fi Settings] in the 3tab, then press the m button.
zPress the opbuttons or turn the 5dial to choose [Eye-Fi trans.], then press the qrbuttons to choose [Disable].
What if [Eye-Fi Settings] does not appear?
[Eye-Fi Settings] will not appear when an Eye-Fi card is not inserted in the camera, and when an Eye-Fi card’s write-protect tab is in the locked position. For this reason, settings cannot be changed for Eye-Fi cards equipped with a write- protect tab when the tab is in the locked position.
