Canon 5685B001, 8409B001 Accessing the Wi-FiMenu, Initial Connection via Wi-Fi, Configuring the Computer for a Wi-FiConnection (Windows Only)

On a computer running Windows, configure the following settings before connecting the camera to the computer wirelessly.

1Confirm that the computer is connected to the access point.

zzFor instructions on checking your network connection, refer to the computer user manual.

2 Configure the setting.

zzClick in the following order: [Start] menu ► [All Programs] ► [Canon Utilities] ► [CameraWindow] ► [Wi-Fi connection setup].

zzIn the application that opens, follow the on-screen instructions and configure the setting.

• The following Windows settings are configured when you run the utility in step 2.

-Turn on media streaming.

This will enable the camera to see (find) the computer to access via Wi-Fi.

-Turn on network discovery.

This will enable the computer to see (find) the camera.

-Turn on ICMP (Internet Control Message Protocol). This allows you to check the network connection status.

-Enable Universal Plug & Play (UPnP).

This will enable network devices to detect each other automatically.

•Some security software may prevent you from completing the settings as described here. Check the settings of your security software.

To start with, register a camera nickname.

This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi.

1 Access the Wi-Fi menu.

zzPress the <1> button to turn the camera on.

zzPress the <o> button.

2Enter a nickname.

zzPress the <m> button to access the keyboard, and then enter a nickname (=24).

zzUp to 16 characters can be used.

zzPress the <o><p> buttons or turn the <5> dial to choose [OK], and then press the <m> button.

zzThe Wi-Fi menu is displayed.

Cover

Before Use

Common Camera Operations

Basic Guide

Advanced Guide

Index

101