Still Images | Movies |
1Access the setting screen. zzPress the <n> button, choose [IS
|
| Settings] on the [4] tab, and then press | |
| 2 | the <m> button (=23). | |
| Configure the setting. | ||
| zzChoose [IS Mode], and then choose the | ||
|
| desired option (=23). | |
|
| ||
Continuous | Optimal image stabilization for the shooting conditions is automatically | ||
applied (Intelligent IS) (=30). | |||
| |||
Shoot Only* | Image stabilization is active only at the moment of shooting. | ||
Off | Deactivates image stabilization. |
* The setting is changed to [Continuous] for movie recording.
•If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this case, set [IS Mode] to [Off].
Movies
Shooting Movies with Subjects at the Same Size Shown before Shooting
Normally, once movie recording begins, a smaller image display area is shown, with the subject slightly enlarged due to rotational image stabilization. To shoot subjects at the same size shown before shooting, you can disable this image stabilization.
zzFollow the steps in “Changing the IS Mode Settings” (=67) to access the [IS Settings] screen.
zzChoose [Dynamic IS], and then choose [2] (=30).
• You can also set [IS Mode] to [Off], so that subjects are recorded at the same size shown before shooting.
Cover
Before Use
Common Camera Operations
Basic Guide
Advanced Guide
1 | Camera Basics |
2 | Auto Mode |
3 | Other Shooting |
Modes | |
4 | P Mode |
5 ModeTv, Av, and M | |
6 | Playback Mode |
7 | |
8 | Setting Menu |
9 | Accessories |
10 | Appendix |
Index
67