Canon 5685B001, 8409B001 Customizing Camera Operation, Deactivating the AF-AssistBeam, Deactivating the Red-EyeReduction Lamp, Changing the Image Display Style after Shots

Customize shooting functions on the MENU [4] tab as follows. For instructions on menu functions, see “Using Menus” (=23).

Still Images

You can deactivate the lamp that normally lights up to help you focus when you press the shutter button halfway in low-light conditions.

zzPress the <n> button, choose [AF‑assist Beam] on the [4] tab, and then choose [Off] (=23).

zzTo restore the original setting, repeat this process but choose [On].

Still Images

You can deactivate the red-eye reduction lamp that lights up to reduce red- eye when the flash is used in low-light shots.

1Access the [Flash Settings] screen.

zzPress the <n> button, choose [Flash Settings] on the [4] tab, and then press the <m> button (=23).

2Configure the setting.

zzChoose [Red-Eye Lamp], and then choose [Off] (=24).

zzTo restore the original setting, repeat this process but choose [On].

Still Images

You can change how long images are displayed and what information is displayed immediately after shooting.

1 Access the [Review image after

		shooting] screen.
	zzPress the <n> button, choose
		[Review image after shooting] on the
		[4] tab, and then press the <m> button
	2	(=23).
	2	Configure the setting.
	zzChoose [Display Time], and then choose
		the desired option.
	zzTo restore the original setting, repeat this
		process but choose [Quick].

Quick	Displays images only until you can shoot again.
2 sec.,	Displays images for the specified time. Even while the shot is displayed, you
4 sec.,
4 sec.,	can take another shot by pressing the shutter button halfway again.
8 sec.
8 sec.
Hold	Displays images until you press the shutter button halfway.
Off	No image display after shots.

Cover

Before Use

Common Camera Operations

Basic Guide

Advanced Guide

Index