Previous Access Points
You can reconnect to any previous access points automatically by following step 3 in “Connecting without an Access Point” (=106).
•To use the camera as an access point, choose [Switch Network] on the screen displayed when you establish a connection, and then choose [Set Camera As Access Point].
•When reconnecting via a previous access point, connect the target device to the access point in step 4.
•To switch access points, choose [Switch Network] on the screen displayed when you establish a connection, and then follow the procedure in “Connecting to
(=104).
Connecting to Another Camera
Connect two cameras via
• Only
1Access the
2Choose camera.
zzPress the <o><p><q><r> buttons or turn the <5> dial to choose [4], and then press the <m> button.
3Choose [Add a Device].
zzPress the <o><p> buttons or turn the <5> dial to choose [Add a Device], and then press the <m> button.
zzFollow steps 1 – 3 on the target camera too.
zzCamera connection information will be added when [Start connection on target camera] is displayed on both camera screens.
Cover
Before Use
Common Camera Operations
Basic Guide
Advanced Guide
1 | Camera Basics |
2 | Auto Mode |
3 | Other Shooting |
Modes | |
4 | P Mode |
5 ModeTv, Av, and M | |
6 | Playback Mode |
7 | |
8 | Setting Menu |
9 | Accessories |
10 | Appendix |
Index
108