ETTL
mJZoom
2'-1mm
ZOOM :Setting
the
Flash
Coverage
and
Using
the
Wide
Panel
The flash coverage can
be
setto match the lens focal length from
24mm to 105mm. The flash coverage can
be
setautomatically or
manually. Also, with the built-in wide panel, the flash coverage can
be
expanded for 14mmwide-angle lenses.
Press the
<ZOOM/~>
button.
Turn the <@>dial to change the
flash coverage.
If<
1m
>
is
notdisplayed, the flash
coveragewill
be
set automatically.
[l]
Ifyou set the flash coverage manually, make sure it covers the lens focal
lengthso that the picture will not have adark periphery.
l~
Ifyou use acommercially-available sync cord to connect the camera to
theSpeedlite's
PC
terminal, setthe flash zoom manually.
Using the Wide Panel
Pull outthe wide panel and place
it
over
the flash head as shown. The flash
coverage will then
be
extended for
14mm.
The catchlightpanel will come out at
the same time. Push the catchlight
panel back
in.
The
<ZOOM/~>
button will not
work.
[l]
Theflash coverage will not be compatible with the EF15mm f/2.8 Fisheye
lens.
Ifyou use bounce flash with the wide panel
in
place,the entire display on
theLCD panel will blink as awarning. Since the subject will be
illuminatedby both the bounce flash and direct flash, it will look
unnatural.
Pullout the wide panel gently. Using excessive force may detach the
widepanel.
20