Turning on the Power Switch

,II11111III1111111111111111111\1
Setthe power switch to <ON>.
l'"
Theflash recycling starts.
Checkthat the flash
is
ready.
•The pilotlamp will first turn green (ready
for quickflash),
then
red
(flash ready).
Pressing the pilot lampwill fire atest
flash.
About Quick Flash
Quickflash enables aflash to be fired before flash-ready, when the pilot
lamp
is
still green.
Although the Guide
No.
will
be
1/6to 1
/2
thatof the full output, quick flash
is
effectivefor near subjects and when you want ashorter recycle time.
Setthe drive mode to single shooting. Quick flash cannot be used in the
continuousshooting, FEB, manual flash, and stroboscopic flash modes.
[IliI
Quickflash can also
be
usedduring continuous flash shooting.
(C.Fn-06
~
p.27)
AboutAuto Power Off
To
save batterypower, the power will turn off automatically after a
certain period (approx. 1.5 min. to 15 min.)
of
idle use.
To
turn on the
Speedlite again, pressthe camera's shutter button halfway.
Or
press
the Speedlite's test firing button.
[IliI
Auto PowerOff can also
be
disabled. (C.Fn-01
~
p.27)

[lJ

•Atestflash cannot be fired while the camera's operation timer 04 or 06
is
active.
•TheSpeedlite's settings will be retained
in
memoryeven after the power
is
turnedoff.
To
retainthe Speedlite's settings after you replace the
batteries, turnoff the power and replace the batteries within 1minute.
10