Operating During a

Power Failure

CAUTION

When lighting the surface burners, be sure all of the controls are in the OFF position. Strike the match first and hold it in position before turning the knob to Lite.

1.Hold a lighted match to the desired surface burner head.

2.Push in and turn the control knob slowly to Lite.

3.Once lit, adjust the flame to the desired level.

High Performance Burner

(select models) (12,000 BTU*)

There is one high speed burner on your range, located in the right front position. This burner offers higher speed cooking that can be used to quickly bring water to a boil and for large- quantity cooking.

Simmer Burner (select models)

This burner is located in the left rear position. The simmer burner offers a lower BTU* flame for delicate sauces or melting chocolate.

* BTU ratings will vary when using LP gas.

Cooktop

To prevent the cooktop from discoloring or staining:

•Clean cooktop after each use.

•Wipe acidic or sugary spills as soon as the cooktop has cooled as these spills may discolor the porcelain.

Sealed Burners

The sealed burners of your range are secured to the cooktop and are not designed to be removed. Since the burners are sealed into the cooktop, boilovers or spills will not seep underneath the cooktop.

However, the burner should be cleaned after each use. (See page 6 for cleaning directions.)

Unlike a range with standard gas burners, this cooktop does not lift-up nor is it removable. Do not attempt to lift the

cooktop for any reason.

Conventional Burners

Freestanding ranges with conventional gas burners feature a lift-up cooktop.

To raise the cooktop:

When cool, grasp the front edge

 

of the cook-top and gently lift up

SUPPORT ROD

 

until the two support rods, if

 

equipped, at the front of the

 

cooktop snap into place.

 

To lower:

Hold the front edge of the cooktop and carefully push back on each support rod, if equipped, to release the notched support. Then gently lower the top into place. The support rods will slide into the cooktop frame.

Burner Grates

The grates must be properly positioned before cooking. Improper installation of the grates may result in chipping of the cooktop.

Do not operate the burners without a pan on the grate. The grate’s porcelain finish may chip without a pan to absorb the heat from the burner flame.

Although the burner grates are durable, they will gradually lose their shine and/or discolor, due to the high temperatures of the gas flame.

Notes:

•A properly adjusted burner with clean ports will light within a few seconds. If using natural gas, the flame will be blue with a deeper blue inner cone.

If the burner flame is yellow or is noisy, the air/gas mixture may be incorrect. Contact a service technician to adjust. (Adjustments are not covered by the war- ranty.)

With LP gas, slight yellow tips on the flames are acceptable. This is normal and adjustment is not necessary.

•With some types of gas, you may hear a “popping” sound when the surface burner is turned off. This is a normal operating sound of the burner.

•If the control knob is turned very quickly from High to Low, the flame may go out, particularly if the burner is cold. If this occurs, turn the knob to the OFF position, wait several seconds and relight the burner.

•The flame should be adjusted so it does not extend beyond the edge of the pan.

12

Page 12 Page 14
Page 13
Image 13
Maytag 8113P560-60 Operating During a Power Failure, High Performance Burner, Cooktop, Sealed Burners, Burner Grates
Page 12 Page 14

8113P560-60 specifications

The Maytag 8113P560-60 is a top-rated appliance designed to bring efficiency and convenience to your laundry room. This model incorporates a range of features and technologies that enhance performance while minimizing energy consumption.

One of the main characteristics of the Maytag 8113P560-60 is its powerful motor, which ensures that clothes are effectively cleaned and the spin cycle efficiently removes excess water. This is crucial for reducing drying time, allowing users to complete their laundry quickly. The direct drive motor further minimizes vibration and noise, contributing to a quieter laundry experience.

This model features a large capacity drum, which can accommodate sizable loads. This is particularly beneficial for families or individuals who often need to wash multiple items in one go. The stainless steel drum is not only durable but also gentle on fabrics, reducing wear and tear over time.

The Maytag 8113P560-60 is equipped with multiple wash cycles and options to cater to various fabric types and soil levels. Users can select from delicate settings for fragile items, heavy-duty cycles for more robust fabrics, and even specialized cycles for items like jeans or towels. This versatility ensures that every load receives the appropriate care it needs.

Energy efficiency is a vital consideration in today’s eco-conscious market. The Maytag 8113P560-60 utilizes advanced technologies to conserve water and electricity without compromising performance. The high-efficiency detergent dispenser ensures optimal usage of soap, while the design minimizes water consumption per cycle.

In addition to its performance features, the Maytag 8113P560-60 boasts an intuitive control panel. It allows users to easily select cycles and options, making laundry days less cumbersome. LED indicators provide clear information about cycle status, ensuring that users are always informed.

Durability is also a key trait of the Maytag brand. The 8113P560-60 is built with quality materials designed to withstand the rigors of everyday use. This reliability means fewer repairs and a longer lifespan, making it a worthwhile investment for any household.

In summary, the Maytag 8113P560-60 stands out for its robust performance, user-friendly features, and energy-efficient design. Whether you're tackling a heavy load or caring for delicate fabrics, this model is engineered to meet the demands of modern laundry while providing a reliable and high-quality cleaning experience.
Top Page Image Contents