Electrical Connection

Appliances which require electrical power are equipped with a three- prong grounding plug which must be plugged directly into a properly grounded three-hole 120 volt electrical outlet.

Always disconnect power to appliance before servicing.

The three-prong grounding plug offers protection against shock hazards. DO NOT CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD PLUG.

If an ungrounded, two-hole or other type electrical outlet is encountered, it is the personal responsibility of the appliance owner to have the outlet replaced with a properly grounded three-hole electrical outlet.

Removal of Gas Appliance

Gas appliance connectors used to connect this appliance to the gas supply are not designed for continuous movement. Once installed, DO NOT repeatedly move this gas appliance for cleaning or to relocate. If this appliance has to be moved and/or removed for servicing, follow the procedure described in the installation instructions. For information, contact Customer Assistance at 1-800-688-1120 USA and Canada.

To prevent range from accidentally tipping, range must be secured to the floor by sliding rear leveling leg into the anti- tip bracket.

Conventional Surface Burners

(select models)

Under no circumstances are the surface burner assemblies to be taken apart for cleaning. The surface burner assembly can be removed to clean the burner box area.

Freestanding range only:

The two surface burner assemblies are secured in place during transportation with screws. Once the range is installed, these screws may be removed to allow quick and easy removal of the burner assemblies.

To remove:

Allow the burner assembly to cool. Lift up cooktop. Grasp the burner assembly and rotate it slightly toward the left to release the two tabs on the assembly. Then lift the assembly and pull toward the back of the cooktop until the air shutter ends on the assembly release from the valves.

To replace:

Insert the air shutter ends on the burner assembly over the valves and lower the assembly into place. Be sure to secure the two tabs on the burner assembly into the two slots on the burner support bracket which is mounted to the burner bottom. (NOTE: If the tabs are not properly inserted into the slots, the assembly may rock and the burners may not light properly.)

Storage Drawer (select models)

CAUTION

Do not store plastic, paper products, food or flammable materials in this drawer. The drawer may become too warm for these items when the oven is in use.

The storage drawer can be removed to allow you to clean under the range.

To remove:

1.Empty drawer and pull out to the first stop position.

2.Lift up the front of the drawer.

3.Pull out to the second stop position.

4.Grasp sides and lift drawer up and out.

To replace:

1.Fit the ends of the drawer glides into the rails in the range.

2.Lift up the front of the drawer and gently push in to the first stop position.

3.Lift drawer up again and push until drawer is closed.

Oven Bottom

Protect oven bottom against spillovers, especially acidic or sugary spills, as they may discolor the porcelain enamel. Use the correct pan size to avoid spillovers and boilovers.

9

Page 9 Page 11
Page 10
Image 10
Maytag 8113P560-60 Electrical Connection, Removal of Gas Appliance, Conventional Surface Burners, Oven Bottom
Page 9 Page 11

8113P560-60 specifications

The Maytag 8113P560-60 is a top-rated appliance designed to bring efficiency and convenience to your laundry room. This model incorporates a range of features and technologies that enhance performance while minimizing energy consumption.

One of the main characteristics of the Maytag 8113P560-60 is its powerful motor, which ensures that clothes are effectively cleaned and the spin cycle efficiently removes excess water. This is crucial for reducing drying time, allowing users to complete their laundry quickly. The direct drive motor further minimizes vibration and noise, contributing to a quieter laundry experience.

This model features a large capacity drum, which can accommodate sizable loads. This is particularly beneficial for families or individuals who often need to wash multiple items in one go. The stainless steel drum is not only durable but also gentle on fabrics, reducing wear and tear over time.

The Maytag 8113P560-60 is equipped with multiple wash cycles and options to cater to various fabric types and soil levels. Users can select from delicate settings for fragile items, heavy-duty cycles for more robust fabrics, and even specialized cycles for items like jeans or towels. This versatility ensures that every load receives the appropriate care it needs.

Energy efficiency is a vital consideration in today’s eco-conscious market. The Maytag 8113P560-60 utilizes advanced technologies to conserve water and electricity without compromising performance. The high-efficiency detergent dispenser ensures optimal usage of soap, while the design minimizes water consumption per cycle.

In addition to its performance features, the Maytag 8113P560-60 boasts an intuitive control panel. It allows users to easily select cycles and options, making laundry days less cumbersome. LED indicators provide clear information about cycle status, ensuring that users are always informed.

Durability is also a key trait of the Maytag brand. The 8113P560-60 is built with quality materials designed to withstand the rigors of everyday use. This reliability means fewer repairs and a longer lifespan, making it a worthwhile investment for any household.

In summary, the Maytag 8113P560-60 stands out for its robust performance, user-friendly features, and energy-efficient design. Whether you're tackling a heavy load or caring for delicate fabrics, this model is engineered to meet the demands of modern laundry while providing a reliable and high-quality cleaning experience.
Top Page Image Contents