13
Oven Cooking

Setting the Clock

1. Press the CLOCK pad.
• The clock time cannot be set if the control is pro-
grammed for a bake, broil or timing operation.
2. Set the correct time of day using the ▲ or ▼ pads. If the ▲
or ▼ pad is not pressed within 30 seconds, the program
will cancel. Press the CLOCK pad and begin again.

Setting the Timer

The timer can be set from one minute (:01) up to 99 hours and
59 minutes (99:59). Time will be displayed in minutes and not
in seconds. THE TIMER DOES NOT CONTROL THE OVEN.
1. Press the TIMER pad.
• 0:00 will light and the colon (:) will flash in
the display.
2. Press the ▲ or ▼ pad until the desired time is displayed.
• The timer will begin as soon as the time is set.
• The flashing colon indicates that a timing operation is in
progress. (The colon will not flash if the time of day or
oven temperature is displayed.)
• Two short beeps signal the end of the operation. “0:00”
will appear in the display.
• If desired, press the CLOCK pad and the time of day will
briefly reappear in the display during a timing operation.
• If desired, press the BAKE or BROIL pads and the
current temperature setting will briefly reappear in the
display during a timing operation.
To cancel the timer operation:
Press and hold the TIMER pad for several seconds.

Manual Clean Oven Control

(select models)

Using the Touchpads

• Press the desired pad.
• Press the ▲ or ▼ pad to enter time or temperature.
• A beep will sound each time a function pad is pressed. There
is no beep for the ▲ or ▼ pad.
• A double beep will sound if a programming error occurs.
BAKE Use for baking and roasting.
BROIL Use for broiling and top browning.
TIMER Sets timer.
CLOCK Use to set time-of-day clock.
CANCEL Cancels all operations except timer
and clock.
▲ (More) or Enters or changes time, oven
▼ (Less) temperature. Sets HI or LO broil.
Note: Four seconds after pressing the ▲ or ▼ pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the ▲ or ▼ pad, the function will be canceled and the
display will return to the previous display.
Setting the Controls For Baking or Roasting:
1. Press BAKE pad.
• 000 will light and the Bake indicator light
will flash in the display.
• If you press the BAKE pad and do not set an oven temp-
erature within 30 seconds, the program will automatically
cancel and the time of day will reappear in the display.
2. Press the ▲ or ▼ pad until the desired oven temperature is
displayed.
• The oven temperature can be set from 170° to 550° F.
• 350° will appear in the display when either ▲ or ▼ pad
is pressed once.
• Press and tap the ▲ or ▼ pad to change the oven temp-
erature by 5° increments or press and hold the ▲ or ▼
pad to change the oven temperature by 10° increments.
• 100° or the actual oven temperature, whichever is higher,
will appear in the display when the oven turns on.
• The temperature in the display will increase in 5°
increments until preset temperature is reached. A single
beep will sound when the oven is preheated.
• Allow 10 to 15 minutes for the oven to preheat.
• To recall preset temperature during preheat, press the
BAKE pad. The temperature will be displayed for three
seconds.
•To change oven temperature during cooking, press
the Bake pad, then press the ▲ or ▼ pad until the
desired temperature is displayed.
•To change oven temperature during preheat, press
the Bake pad twice, then press the ▲ or ▼ pad until
the desired temperature is displayed.
3. Place food in the oven. Check food for doneness at the
minimum cooking time.