[Standard—Nortel Networks Confidential]
119
Specifying a tool tips delay
To specify the delay before the tool tip shows up
1Select Tools > Preferences and the Miscellaneous list item. In the Tool Tips section, select how long of a delay should be used before a Tool Tip is shown.
2Click Ok to save your changes or Cancel to exit without saving.
Setting the SIP Multimedia PC Client to startup as an icon
This option allows you to set the SIP Multimedia PC Client to startup without opening on your screen (silent startup). You will only see the SIP Multimedia PC Client icon appear in the system tray.
1Select Tools > Preferences and the Miscellaneous list item (Figure 58).
2In the Startup section, select the checkbox if you want the SIP Multimedia PC Client to start up as an icon in the system tray.
3Click Ok to save your changes or Cancel to exit without saving.
Setting the standby option
To set up the standby option
1Select Tools > Preferences and the Miscellaneous list item.
2In the System Standby section, select the checkbox if you want to exit the SIP Multimedia PC Client when the system enters low power mode. Low power mode is one of the following:
•Standby - Power to most PC components is off, but RAM remains powered in order to preserve system state.
•Hibernate - The system state is saved to the hard drive, and power to all PC components is turned off.
•Eject - Similar to Standby, but it causes a hardware
Note: Exiting properly from the SIP Multimedia PC Client is important since it updates your presence status in the network.
SIP Multimedia PC Client User Guide
