Nortel Networks NN10041-112 Placing a voice call from Outlook 2000 (optional)

59
SIP Multimedia PC Client User Guide
[Standard—Nortel Networks Confidential]
There are pre-defined video settings for:
•Home
•Office
• Conference room
• Reception only
The default setting for video is disabled (off). Before you can send or receive
video you must configure the video settings.
“Setting up video (optional)” on page104 for configuration procedures.
Placing a voice call from Outlook 2000 (optional)
You can use the SIP Multimedia PC Client to initiate a call from within your
Microsoft Outlook 2000 email application. D uring the initial installation of the
SIP Multimedia PC Client, you had the option to install the Communications Add
In feature or, COM AddIn. The COM AddIn, installs a Call button in the Outlook
toolbar.
To place a call from Outlook
1Select a message in any Outlook 2000 folder, contacts list or meeting request.
2Click the Call button.
Tip: If you select Mute during an active audio-video call, the outgoing
audio stops, but video is not affected. You will still have outgoing and
incoming video.