Manuals / Brands / Photography / Camcorder / Canon / Photography / Camcorder

Canon 5D Mark III z: Shooting 1 (Red), For Viewfinder Shooting and Live View Shooting

1 404

Download 404 pages, 19.38 Mb

Menu Settings

For Viewfinder Shooting and Live View Shooting

z: Shooting 1 (Red)		Page
Image quality	1/ 41/ 61	119

	73/ 83/ 74/ 84/ 7a/ 8a/ b/ c
	73/ 83/ 74/ 84/ 7a/ 8a/ b/ c

Image review	Off / 2 sec. / 4 sec. / 8 sec. / Hold	55

Beep	Enable / Disable	-

Release shutter	Enable / Disable	32
without card	Enable / Disable	32
without card

Lens aberration	Peripheral illumination: Enable / Disable	147
correction	Chromatic aberration: Enable / Disable	147
correction	Chromatic aberration: Enable / Disable

	Flash firing / E-TTL II metering / Flash sync.
External Speedlite	speed in Av mode / Flash function settings /	191
control	Clear flash settings / Flash C.Fn settings /	191
control	Clear flash settings / Flash C.Fn settings /
	Clear all Speedlite C.Fn’s
Mirror lockup	Disable / Enable	184

Shaded menu options are not displayed in the <A> mode.

What is displayed under [z1: Image quality] depends on the [Record

func.] (p.116) setting under [51: Record func+card/folder sel.]. If [Rec. separately] is set, set the image quality for each card.

348

Contents

MANUAL INSTRUCTION Testing the Camera Before Use and Liability Copyrights Memory Cards EOS Software Instruction Manuals Disk Icons in this Manual Basic Assumptions Introduction Getting Started Basic Shooting Setting the AF and Drive Modes Image Settings Introduction 1 Getting Started Basic Shooting Setting the AF and Drive Modes Image Settings Advanced Operations Flash Photography Shooting Movies Image Playback Post-ProcessingImages Sensor Cleaning Customizing the Camera Reference Software Start Guide Power Card Lens Basic Settings Viewfinder Shooting Exposure Adjustment Flash Live View Shooting Movie Shooting Camera Care LCD Panel and LCD Monitor Cards Cautions During Prolonged Use Insert the battery (p.30) Insert a card (p.31) Attach the lens (p.39) Set the lens focus mode switch to <f> (p.39) Set the power switch to Focus the subject (p.44) Take the picture (p.44) Review the picture (p.55) Page Page Page LCD Panel Page Viewfinder Information Mode Dial Custom shooting modes EF 24-105mmf/4L IS USM lens Battery Charger LC-E6 Battery Charger LC-E6E Getting Started Remove the protective cover 2 Attach the battery LC-E6 3 Recharge the battery For LC-E6 Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged When not using the camera, remove the battery Installing the Battery Open the cover Insert the battery 3 Close the cover Removing the Battery Images can be recorded when at least one card is installed in the camera Installing the Card 1 Open the cover 2 Insert the card With the SD card’s label facing you, push in the card until it clicks in place Page Removing the Card Make sure the access lamp is off, then open the cover Recording 2 Remove the card About the Automatic Self-CleaningSensor 3About Auto Power Off 52: Auto power off zChecking the Battery Level Battery Life 1 Display the menu screen 2 Under the [52] tab, select [Date/ Time/Zone] Date/ Time/Zone 3 Set the date and time 4 Set the time zone Time zone Set the daylight saving time 6 Exit the setting 2 Under the [52] tab, select [LanguageK] LanguageK 3 Set the desired language The camera cannot be used with EF-Slenses Remove the caps Attach the lens 3 Set the lens focus mode switch to <AF About Zooming Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow Attaching a Lens Hood 1 Align the red dots on the hood and lens edges 2 Turn the hood as shown in the illustration Set the IS switch to <1 Press the shutter button halfway Take the picture Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob Holding the Camera Shutter Button Pressing halfway Pressing completely Preventing Camera Shake Mode Dial 6Main Dial (1) After pressing a button, turn the <6> dial (2) Turn the <6> dial only 5Quick Control Dial (1) After pressing a button, turn the <5> dial (2) Turn the <5> dial only hTouch Pad 9Multi-controller 31: Erase images 51: Format card RMulti function Lock 82: Multi function lock ULCD Panel Illumination Displaying Shooting Settings Amode Press the <Q> button Set the desired function Fmodes Settable Functions on Quick Control Screen Function Setting Screen AMode Menu Screen d/s/f/a/FMode Menu Screen Menu Setting Procedure 2 Select a tab Select the desired item Select the setting Set the desired setting 3Formatting the Card Select [Format card] Select the card 3 Select [OK] Format the card in the following cases: The card is new A card-relatederror is displayed (p.371) About Low-levelFormatting 3Setting the Power-offTime/Auto Power Off Select [Auto power off] Auto power off 2 Set the desired time 3Setting the Image Review Time 3Reverting the Camera to the Default SettingsN Select [Clear all camera settings] Select [OK] Image-recordingSettings AF Settings Camera Settings Live View Shooting Settings Displaying the Grid in the Viewfinder 1 Select [VF grid display] VF grid display 2 Select [Enable] Displaying the Electronic Level in the Viewfinder Displaying the Electronic Level on the LCD Monitor 1 Press the <B> button 53: button display options Check the camera’s tilt Help Example: [23] tab [AF-assistbeam firing] Example: [82] tab [Multi function lock] Page Basic Shooting AFully Automatic Shooting (Scene Intelligent Auto) Set the Mode Dial to Area AF frame 2 Aim the Area AF frame over the target subject 3 Focus the subject 4 Take the picture FAQ The focus confirmation light <o> blinks and focus is not achieved Multiple AF points light up simultaneously The shutter speed display is blinking When flash was used, the bottom part of the picture came out unnaturally dark Recomposing the Shot Shooting a Moving Subject ALive View Shooting 1 Set the Live View shooting/Movie shooting switch to <A 2 Display the Live View image on the LCD monitor Setting the AF and Drive Modes 1 On the lens, set the focus mode switch to <AF Press the <o> button. (9) Select the AF mode One-ShotAF for Still Subjects AI Servo AF for Moving Subjects AI Focus AF for Automatic Switching of AF Mode AF Area Selection Mode Single-pointSpot AF (Manual selection) Single-pointAF (Manual selection) AF point expansion (Manual selection ) AF point expansion (Manual selection, surrounding points) Zone AF (Manual selection of zone) 61-pointautomatic selection AF This mode is set automatically in the > mode Selecting the AF Point Manually Press the <S> button Select an AF point AF Point Display Indications Page Page Page Diagram Group A Group B Group C Group D Group E Group F Group G Group H 3Selecting AI Servo AF Characteristics (For a Subject)N Case 1: Versatile multi purpose setting Case 2: Continue to track subject, ignoring possible obstacles Case 3: Instantly focus on subjects suddenly entering AF points Case 4: For subjects that accelerate or decelerate quickly Case 5: For erratic subjects moving quickly in any direction Case 6: For subjects that change speed and move erratically About the Parameters Tracking sensitivity [Locked on: -2 /Locked on: -1] [Responsive: +2 / Responsive:+1] Accel./decel. tracking [+2 / +1] AF pt auto switching Changing Cases’ Parameter Settings Press the <c> button 4 Make the adjustment 5 Exit the setting 22: AI Servo AI Servo 1st image priority : Equal priority : Release priority : Focus priority AI Servo 2nd image priority : Shooting speed priority 23: One Shot USM lens electronic MF : Enable after One-ShotAF : Disable after One-ShotAF OFF: Disable in AF mode AF-assistbeam firing ON: Enable IR: IR AF assist beam only One-ShotAF release priority : Focus priority Lens drive when AF impossible ON: Continue focus search OFF: Stop focus search Selectable AF point : 61 points : 15 points : 9 points Select AF area selection mode : Manual select.:Spot AF : Manual selection:1 pt AF : Manual select.:Zone AF : Auto selection: 61 pt AF AF area selection method → M-Fnbutton → Main Dial Orientation linked AF point : Same for both vert/horiz : Select separate AF points Manual AF point selection pattern : Stops at AF area edges : Continuous AF point display during focus : Selected (constant) VF display illumination AUTO: Auto Adjust All by Same Amount Select [AF Microadjustment] Select [All by same amount] All by same amount Press the <B> button 5 Check the result of the adjustment Adjust by Lens Select [Adjust by lens] Adjust by lens 3 Check and change the lens information Check the lens information Enter the serial number About the Lens Serial Number Page Clearing All AF Microadjustments Clear all Subjects difficult to focus MF: Manual Focusing Set the lens focus mode switch to <MF Focus the subject 1 Press the <o> button. (9) 2 Select the drive mode Select the self-timer Page Image Settings Recording Method with Two Cards Inserted 1 Selectsel.]. [Record func+card/folder Record func+card/folder sel Select [Record func.] Record func Record/play Auto switch card Rec. separately Rec. to multiple Selecting the CF or SD Card for Recording and Playback Select [Record/play] Select [Playback] 1 Select [Image quality] 2 Select the image-recordingquality Image-recordingQuality Setting Examples Guide to Image-RecordingQuality Settings (Approx.) About RAW 31: RAW image processing One-touchImage Quality Setting One-touch image quality setting Maximum Burst During Continuous Shooting Press the <m> button. (9) Set the ISO speed ISO Speed Guide ISO Auto 3Setting the ISO Speed Range Select [ISO speed settings] ISO speed settings Select [ISO speed range] 3 Set the minimum limit 3Setting the ISO Speed Range for Auto ISO Select [Auto ISO range] Auto ISO range Set the minimum limit 3 Set the maximum limit 3Setting the Minimum Shutter Speed for Auto ISO 1 Select [Min. shutter spd.]. Select [Min. shutter spd.], then press <0 2 Set the desired minimum shutter speed Press the <b> button Select [A] 3 Select a Picture Style Picture Style Characteristics DAuto PStandard QPortrait Color tone VMonochrome WUser Def About the Symbols Sharpness Symbols Select a Picture Style Select a parameter 5 Set the parameter Parameter Settings and Effects VMonochrome Adjustment Filter effect Toning effect kFilter Effect lToning Effect Select [User Def.] User Def Press <0 Picture Style Select the base Picture Style 6 Select a parameter 7 Set the parameter Press the <n> button. (9) Select the white balance About White Balance OCustom White Balance Photograph a white object Select [Custom White Balance] Custom White Balance Import the white balance data PSetting the Color Temperature Select [White balance] White balance Set the color temperature White Balance Correction 1 Select [WB Shift/Bkt.] Shift/Bkt 2 Set the white balance correction Shift White Balance Auto Bracketing Bracketing Sequence 3Correcting the Brightness and Contrast AutomaticallyN High ISO Speed Noise Reduction Select [High ISO speed NR] High ISO speed NR 3 Take the picture Long Exposure Noise Reduction 1 Select [Long exp. noise reduction] Long exp. noise reduction 2 Set the desired setting [Auto] Page Select [Highlight tone priority] [Highlight tone priority], then press <0 Select [Enable] 3Lens Peripheral Illumination / Chromatic Aberration Correction Peripheral Illumination Correction 1 Select [Lens aberration correction] Lens aberration correction 2 Select the setting Chromatic Aberration Correction 1 Select the setting [Chromatic aberration], then press <0 2 Take the picture About the Lens Correction Data Create a Folder Select [Folder] Folder Select [Create folder] Create folder Selecting a Folder About Folders Creating Folders with a Personal Computer BE3B 0001.JPG Registering or Changing the File Name 1 Select [File name] Select [Change User setting] About User setting2 Select the registered file name .JPG Select [File numbering] Select the file numbering method Continuous Auto Reset Manual Reset Select [Copyright information] Select the option to be set Enter author’s name Enter copyright details Enter text Checking the Copyright Information Deleting the Copyright Information Delete copyright information Author Copyright 1 Select [Color space] Color space 2 Set the desired color space sRGB Adobe RGB Advanced Operations Set the Mode Dial to <d Check the display Differences Between <d> and <A> Modes About Program Shift Set the Mode Dial to <s Set the desired shutter speed 4 Checkshoot. the viewfinder display and Page Set the Mode Dial to <f Set the desired aperture Depth of Field PreviewN Set the Mode Dial to <a Set the shutter speed and aperture 4 Set the exposure and take the picture Select the metering mode q: Evaluative metering w: Partial metering r: Spot metering e: Center-weightedaverage metering rSpot metering eCenter-weightedaverage metering 2: Expo.comp./AEB 2 Set the exposure compensation amount Select [Expo.comp./AEB] Expo. comp./AEB Set the AEB range Press the <A> button. (0) Recompose and take the picture AE Lock Effects Set the Mode Dial to <F HDR Shooting Select the HDR mode 3 Set [Adjust dyn range] Disable HDR 4 Set [Effect] About Effects Natural Art standard Art vivid Art bold 5 Set [Continuous HDR] 1 shot only Every shot 6 Set [Auto Image Align] 7 Set the images to be saved Page Select multiple exposure Set [Multiple exposure] On: Func/Ctrl (Function and control priority) On: ContShtng (Continuous shooting priority) 4 Set [Multi-exposctrl] Exposure Compensation Setting Guide for Multiple Exposures Average No. of exposures Bright/Dark 6 Set the images to be saved Result only 7 Set [Continue Mult-exp] 8 Take the first exposure 9 Shoot subsequent exposures Merging multiple exposures with an image recorded in the card You can only select images 1 Select [Select image for multi. expo.] Select [Select image for multi. expo.], then press <0 Checking and Deleting Multiple Exposures During Shooting On:Func/ctrl Are there any restrictions on the image-recordingquality Can I merge images recorded in the card Are multiple exposures possible with Live View shooting What file numbers are used for saving merged multiple- exposures Will auto power off take effect during multiple-exposureshooting 1 Set [Mirror lockup] to [Enable] Mirror lockup 2 Focus the subject, then press the shutter button completely 3 Press the shutter button completely again Remove the eyecup Attach the eyepiece cover 1 Open the terminal cover 2 Connect the plug to the remote control terminal 2 Set the lens focus mode switch to <MF 5 Press the remote controller’s transmit button Flash Photography EOS-dedicated, EX-seriesSpeedlites FE lock Using Non-EX-seriesCanon Speedlites Using Non-CanonFlash Units Page Attach the Speedlite to the camera and turn on the Speedlite 1 Select [External Speedlite control] External Speedlite control 2 Select the desired item [Flash sync. speed in Av mode] : Auto : 1/200-1/60sec. auto : 1/200 sec. (fixed) 1/200-1/60 [Flash function settings] Wireless functions Flash zoom (Flash coverage) AUTO Shutter synchronization Second-curtain Flash exposure bracketing Flash Custom Function Settings Select [Flash C.Fn settings] Select [Flash C.Fn settings], then press <0 Set the functions Clearing Flash Custom Function Settings About Remote Live View Shooting 2 Display the Live View image Enabling Live View Shooting Battery Life with Live View Shooting About the Information Display Final Image Simulation Final image simulation during Live View shooting Exposure (with [Expo. simulation: Enable]) i/ y/ f/ R/ B/ S/ ASettings QQuick Control Select a function and set it Live View shooting Quick mode 3x3 l 6x4 m 3x3+diag n Page Exposure simulationN Silent LV shootingN shifting the lens vertically Metering timerN Selecting the AF Mode Live Mode: d the AF operation will take longer than with the Quick mode Display the Live View image Move the AF point u(Face detection) Live Mode: c 1 Display the Live View image 2 Focus the subject Live Mode and u(Face Detection) Live Mode Notes AF operation Page Quick Mode: f 2 Selectmode. the AF area selection 3 Select the AF point 4 Focus the subject 5 Take the picture 1 Set the lens focus mode switch to <MF Move the magnifying frame 3 Magnify the image 4 Focus manually Live View Shooting Cautions Page Shooting Movies Autoexposure Shooting 1 Set the Mode Dial to <A>, <d>, or <F 2 Set the Live View shooting/Movie shooting switch to <k Shoot the movie Shutter-priorityAE Set the Live View shooting/Movie shooting switch to <k 4 Focus and shoot the movie Focus and shoot the movie Aperture-priorityAE 1 Set the Mode Dial to <f ISO speed in the Amode ISO speed in the d, s, f, and Fmodes 2: ISO speed settings 25600/H Notes for Autoexposure, Shutter-priorityAE, and Aperture-priority For details, refer to the Speedlite’s instruction manual Manual Exposure Shooting 1 Set the Mode Dial to <a 3 Set the ISO speed 4 Set the shutter speed and aperture 5 Focus and shoot the movie ISO speed during manual-exposureshooting Information Display Notes on Movie Shooting Final image simulation for movies Shooting Still Photos Page f/ R/ B/ i/ S/ A Settings Sound recording: Manual 1 Press the <Q> button 2 Select a function and set it 53: Video system Image size A[1920x1080] B[1280x720] C[640x480] Total Movie Recording Time and File Size Per Minute About Movies Exceeding 4 GB Movie Shooting Time Limit About Full HD Sound Recording/Sound-RecordingLevel [Manual] Rec. level [Disable] Wind Filter Using the microphone Using headphones Page 5: Time code Count Up [Rec run] Start Time Setting Manual input setting Movie Playback Count With [Time code] set: Drop Frame [z4] Menu Movie recording size [z5] Menu Silent Control Movie shooting button Movie Shooting Cautions Page Image Playback Single-ImageDisplay Play back the image 3 Exit the image playback 3Grid Display 33: Playback grid Sample Information for Still Photos Sample Information for Movies About the Highlight Alert 33: Highlight alert About the AF Point Display 33: AF point disp About the Histogram 33: Histogram disp [Brightness] Display [RGB] Display HDisplay Multiple Images on One Screen (Index Display) 1 Press the <u> button 2 Switch to the index display 3 Select an image IJump through Images (Jump Display) Select [Image jump w/6] Image jump w Select the jump method d: Display images one by one 1 Magnify the image 2 Scroll around the image 3Magnification Settings Magnificatn (apx) 1x (no magnification) 2x, 4x, 8x, 10x (magnify from center) Actual size (from selected point) 1 Set the two-imagedisplay 2 Select the images to be compared Select [Rotate image] Rotate image Select an image 3 Rotate the image Set ratings with the <c> Button Select an image or movie 2 Rate the image or movie 3Set ratings with the menu 1 Select [Rating] 2 Select an image or movie Rate the image or movie Taking advantage of ratings : Protect images 9: Rating : Highlight alert :AF point display e: Image jump w Page Playback on a TV set(p.268, 271) Playback on the Camera’s LCD Monitor (p.261-267) Playback and Editing with a Personal Computer(p.390) Select a movie 3 On the single-imagedisplay, press <0 Play back the movie Page 1 On the movie playback screen, select [X] 2 Specify the part to be edited out 3 Check the edited movie 4 Save the movie New file Overwrite Select [Slide show] Slide show Select the images to be played [All images/Movies/Stills] jAll images/ kMovies 3 Set the play time and repeat Set up 4 Start the slide show Start Loading image 5 Quit the slide show Viewing on High-Definition(HD) TV Sets 1 Connectcamera. the HDMI cable to the dHDMI MINI 2 Connectset. the HDMI cable to the TV 3 Turn on the TV and switch the TV’s video input to select the connected port 5 Press the <x> button Using HDMI CEC TV Sets 1Set [Ctrl over HDMI] to [Enable] Ctrl over HDMI 2 Connect the camera to a TV set Press the camera’s > button Movie playback menu Press the remote control’s Enter button Press the Viewing on Non High-Definition(HD) TV Sets 1 Connect the provided AV cable to the camera Canon 2 Connectset. the AV cable to the TV 3Protecting a Single Image Select [Protect images] Protect images Select [Select images] Select images 3Protecting All Images in a Folder or Card Unprotect all images in folder Unprotect all images on card Set with the <c> Button Set [53: mbtn function] to [Protect] 3Copying Individual Images 1 Select [Image copy] Image copy 2 Select [Sel.Image] Sel.Image 4 Select the images to be copied Select the target folder 8 Select [OK] 3Copying All Images in a Folder or Card 1: Image copy Sel All image Erasing a Single Image Play back the image to be erased Press the <L> button Erase the image Erase 2 Select [Select and erase images] Select [Select and erase images], then press <0 Erase the images 3Erasing All Images in a Folder or Card All images in folder 3Adjusting the LCD Monitor Brightness Select [LCD brightness] LCD brightness Select [Auto] or [Manual] Adjust the brightness 3Auto Rotation of Vertical Images 1 Select [Auto rotate] Auto rotate 2 Set the auto rotation OnzD Post-Processing Images 1 Select [RAW image processing] 3 Process the image Displaying the setting screen 4 Save the image About the Magnified View Images with Aspect Ratio Setting RAW Image-processingOptions Brightness adjustment White balance (p.137) Picture Style (p.129) Auto Lighting Optimizer (p.142) Color space (p.158) Peripheral illumination correction (p.147) Distortion correction Chromatic aberration correction About peripheral illumination correction, distortion correction, and chromatic aberration correction JPEG cand RAW images cannot be resized 1 Select [Resize] Resize Select the desired image size Resize Options According to Original Image Size About Image Sizes Sensor Cleaning Cleaning the Sensor Now 1 Select [Sensor cleaning] 2 Select [Clean nowf] Clean nowf Disabling Automatic Sensor Cleaning Preparation Obtain the Dust Delete Data Select [Dust Delete Data] Dust Delete Data Photograph a solid-white object About the Dust Delete Data Select [Sensor cleaning] Select [Clean manually] Clean manually CLn Clean the sensor Page Page Turn on the printer Connecting the Camera to a Printer 1 Set the camera’s power switch to <2 2 Set up the printer 3 Connectingprinter. the camera to the 6 Play back the image Select the image to be printed 2 Press <0 3 Select [Paper settings] Paper settings Q Setting the Paper Size Y Setting the Paper Type USetting the Page Layout 4 Set the printing effects What is displayed on the screen 5 Set the date and file number imprinting 6 Set the number of copies 7 Start printing Print eAdjustment of Printing Effects Brightness Adjust levels kBrightener Red-eyecorr Trimming the Image 1 On the print settings screen, select [Trimming] 2 Set the trimming frame size, position, and aspect ratio Changing the trimming frame size Moving the trimming frame Page Setting the Printing Options Select [Print order] Print order Select [Set up] Set the option as desired Page Print Ordering [Standard] [Both] [Index] Byn Mark all in folder 1 Prepare to print 4 Set the [Paper settings] (p.298) 5 Select [OK] Pictures My Pictures Preparation for Image Transfer 2 Connect the camera to a personal computer 3 Set the camera’s power switch to <1 EOS Utility 3Transferring RAW+JPEG Images RAW+JPEG transfer JPEG only Select [Image transfer] Image transfer Select [Image sel./transfer] Image sel./transfer Select [Sel.Image] 5 Transfer the image Sel.n Folder images failed transf Clear folder transf. history Folder images not transfer’d Customizing the Camera C.Fn1: Exposure C.Fn2: Display/Operation C.Fn3 C.Fn4 C.Fn1: Exposure Exposure level increments ISO speed setting increments Bracketing auto cancel Bracketing sequence Number of bracketed shots Safety shift C.Fn2: Display/Operation Warnings zin viewfinder LV shooting area display Dial direction during Tv/Av Multi function lock C.Fn3: Others Add cropping information Default Erase option Select [82: Custom Controls] Select a camera button or dial 3 Assign a function Assignable Functions to Camera Controls Page : Metering and AF start Registering and using an AF point : AF stop : Switch to registered AF function : ONE SHOT z AI SERVO : Switch to registered AF point : AF point direct selection : Metering start : AE lock : AE lock (while button pressed) : FE lock : Set ISO speed (hold button, turn ) : Set ISO speed (during metering) : Shutter speed setting in M mode : Aperture setting in M mode : One-touchimage quality setting : One-touchimage quality (hold) : Image quality : Picture Style : Depth-of-fieldpreview : IS start : VF electronic level : Menu display : Image playback : Magnify/Reduce (press SET, turn ) : No function (disabled) Select [My Menu settings] My Menu settings Select [Register to My Menu] Select [Register to My Menu], then press <0 Register the desired items 1 Select [Custom shooting mode (C1-C3)] Custom shooting mode (C1-C3) Select [Register settings] Settings Registered Shooting functions Menu functions [z4 (Live View shooting)] [z4 (Movie)] Page Reference Camera Settings Shooting Settings Select [Battery info.] Battery info Registering the Battery to the Camera Select [Register] Register Labeling the Serial No. on the Battery Write the serial number on a 2 Take out the battery and affix the label Checking the Remaining Capacity of a Registered Battery Pack Look for the serial number Delete info 2 Select the battery pack information to be deleted 3 Press the <L> button Connect the DC Coupler’s plug Connect the power cord Place the cord in the groove Insert the DC Coupler 1 Set the power switch to <2 2 Unscrewscrew. the battery holder 3 Take off the battery holder 5 Tightenscrew. the battery holder’s Insert an Eye-Ficard. (p.31) Select [Eye-Fisettings] 3 Enable Eye-Fitransmission 4 Display the connection information 5 Check the [Access point SSID:] Access point SSID: 6 Take the picture Not connected Connecting Function Availability Table According to Shooting Mode Page For Viewfinder Shooting and Live View Shooting z: Shooting 1 (Red) z: Shooting 2 (Red) z: Shooting 3 (Red) z: Shooting 4* (Red) 2: AF1 2: AF2 2: AF3 2: AF4 2: AF5 3: Playback 1 (Blue) 3: Playback 2 (Blue) 3: Playback 3 (Blue) 5: Set-up1 (Yellow) 5: Set-up2 (Yellow) 5: Set-up3 (Yellow) 5: Set-up4 (Yellow) 8: Custom Functions (Orange) 9: My Menu (Green) For Movie Shooting z: Shooting 4*1 (Movie) (Red) z: Shooting 5*1 (Movie) (Red) Bundled Accessories Page The battery pack does not recharge The charger’s lamp blinks at high speed The charger’s lamp does not blink The battery becomes exhausted quickly The camera turns off by itself The lens cannot be attached The viewfinder is dark No images can be shot or recorded The card cannot be used The image is out of focus There are fewer AF points The AF point is blinking I cannot lock the focus and recompose the shot The continuous shooting speed is slow The maximum burst during continuous shooting is lower ISO 100 cannot be set. ISO speed expansion cannot be selected The Auto Lighting Optimizer cannot be set The multiple-exposureimage is shot in 1quality The flash does not fire The flash always fires at full output Flash exposure compensation cannot be set High-speedsync cannot be set in the <f> mode Movie shooting terminates by itself The ISO speed cannot be set for movie shooting ISO 16000/20000/25600 cannot be set for movie shooting The exposure changes during movie shooting The subject looks distorted during movie shooting Time code is off I cannot change the setting with <6>, <5>, or <9 The camera button/dial’s function has changed The menu screen shows few tabs and options The file name’s first character is an underscore (“_”) The fourth character in the file name changes The file numbering does not start from The shooting date and time displayed is incorrect The date and time is not in the picture [###] is displayed [Eye-Fisettings] does not appear Part of the image blinks in black A red box is displayed on the image The image cannot be erased The movie cannot play No image appears on the TV screen There are multiple movie files for a single movie shoot My card reader does not recognize the card I cannot process the RAW image I cannot resize the image The shutter makes a noise during sensor cleaning Automatic sensor cleaning does not work I cannot transfer images to a personal computer Page Page Page Page Page Page Page Page Page Page Trademarks About MPEG-4Licensing Use of genuine Canon accessories is recommended Preventing Serious Injury or Death Preventing Injury or Equipment Damage Page CAUTION Page Page Software Start Guide EOS Solution Disk aEOS Utility bDigital Photo Professional cImageBrowser EX dPicture Style Editor Installing the Software on Windows [Easy Installation] [Finish] Installing the Software on Macintosh [Restart] EOS Software Instruction Manuals Disk