Shooting Range and Focusing

• [Servo AF] (see below) is set to [On] and cannot be changed.

• Tracking may not be possible when subjects are too small or move too rapidly, or when subject color or brightness matches that of the background too closely.

•[AF-Point Zoom] on the 4tab is not available.

•eis not available.

• The camera can detect subjects even if you press the shutter button halfway without pressing the qbutton. After your shot, is displayed in the center of the screen.

•When shooting in fmode (p. 125), press and hold the qbutton for at least one second.

•If [Face ID] is set to [On], names will not display when registered people are

detected, but the names will be recorded in the still images (p. 148). However, a name will display if the subject chosen to focus on is the same as a person detected with Face ID.

Still Images

Shooting with Servo AF

This mode helps avoid missing shots of subjects in motion, because the camera continues to focus on the subject and adjust the exposure as long as you press the shutter button halfway.

Configure the setting.

zPress the nbutton, choose [Servo AF] on the 4tab, and then choose [On] (p. 40).

Focus.

zThe focus and exposure are maintained where the blue AF frame is displayed while you are pressing the shutter button halfway.

131