Using GPS Function

Logging Camera Location Data

You can keep a record of where the camera was taken by using location information acquired from GPS satellite signals over a period of time. Daily location data based on acquired GPS signals is logged to a file, separate from image data. This log file can be loaded into the included software (p. 2) to trace the route taken with the camera on a map.

Since the date will be updated, and information location will be logged continually whether or not the camera is on, battery life will be reduced even when the camera is off. You may find the battery to be nearly depleted when turning the camera on. Charge the battery as needed, or keep a spare charged battery with you.

Activate GPS.

zFollow step 1 on p. 45 to configure the setting.

Configure the setting.

zPress the lbutton, and press the qr buttons or turn the 5dial to choose [On].

zTo restore the original setting, repeat this process but choose [Off].

Finish the setup process.

zWhen you press the mbutton, a message about the logger is displayed. Be sure to read

the message.

XThe logger function will operate, and the date, time and location information based on

signals acquired from GPS satellites will be logged to the camera.

zThe logger will continue to function even when the camera is turned off.

48