Canon 5900B001, 6195B001, 6196B001, SX260 HS Automatically Updating the Date and Time, Set [GPS] to [On], Configure the setting, Check the GPS log files, Confirming Automatic Time Updating

Using GPS Function

Number of Logs Acquired Check the GPS log files.

zChoose a date and press the mbutton. The recorded latitude, longitude, time, and number of logs acquired on that date are displayed.

Latitude Longitude Time

Automatically Updating the Date and Time

You can have the date and time for the configured time zone (pp. 17, 189) automatically updated when the camera receives GPS signals.

Set [GPS] to [On].

zFollow steps 1 – 2 on p. 45 to configure the setting.

Configure the setting.

zPress the nbutton, choose [GPS Auto Time] on the 3tab, and then choose [On] (p. 40).

zTo set daylight saving time, follow the steps on p. 189.

Confirming Automatic Time Updating

[Update completed] is shown on the [Date/Time] screen in step 2 on p. 17 after the date and time are automatically updated. [GPS Auto Time: On] is shown if a GPS signal has not been received yet.

•When [GPS Auto Time] is set to [On], you cannot change the date

and time by accessing the [Date/Time] screen as described on p. 18, because this information will be updated automatically.

51