
The indicators light or blink when the power button or the shutter button is pressed.
Never do the following while an indicator is lit. These actions may corrupt image data.
-Shake or jolt the camera
-Shut off the power, or open the memory card slot/battery cover
zUpper Indicator |
|
Green: | Ready to shoot |
Blinking Green: | Image recording/reading/erasing/transferring |
| (when connected to a computer) |
Orange: | Ready to shoot (flash on) |
Blinking Orange: | Ready to shoot (camera shake warning) |
zLower Indicator |
|
Yellow: | Macro mode/infinity mode/AF lock mode |
Blinking Yellow: | Focusing difficulty (camera beeps once) |
This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power.
Shooting Mode Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor automatically turns off 1 minute* after the last control is accessed even if [Auto Power Down] is set to [Off]. Press any button other than the power button or change the camera orientation to turn the LCD monitor back on.
Playback Mode Powers down approximately 5 minutes after the last Connected to a Printer control is accessed on the camera.
* This time can be changed.
z The power saving function will not activate during a slide show or while the camera is connected to a computer.
zThe power saving function settings can be changed (p. 30).
22