The ISO speed will rise with some settings, which may increase the "noise" in the image.

Changing the Save Method for the Original Image

When you are shooting still images in a My Colors mode, you can specify whether or not both the altered image and the original image are recorded.

1 (Rec.) Menu[Save Original] [On]/[Off].

See Menus and Settings (p. 27).

zIf [On] is selected, the two images will be numbered consecutively with the altered image following the original.

When [Save Original] is Set to [On]

- Only the altered image is shown in the LCD monitor during shooting.

-The image that appears in the LCD monitor immediately after recording is the altered image. If you erase the image at this point, the original image is erased along with the altered image.

Exercise adequate caution before deleting a file.

-Since two images are recorded with each shot, the number of shots remaining is approximately half the number displayed when this function is set to [Off].

60