Setting the Camera to the Color Accent Mode

Colors other than the color specified in the LCD monitor are shot in black and white.

1 (Color Accent) .

See Menus and Settings (p. 26).

zThe camera will switch to color input mode and the display will alternate between the original image and the color accent image (using the previously set color).

2Aim the camera so that the color you wish to retain appears at the center of the LCD monitor and press the button.

zOnly one color can be specified.

zYou can use the or button to specify the range of colors that are retained.

•-5: Only takes the color that you want to retain

•+5: Also takes colors close to the one that you want to retain

3.

zThis completes the setting.

zIf you press the MENU button at this point, you will return to the screen where you can select a My Colors mode.

z The default color accent is green.

z You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings.

z The specified color accent is retained even if the camera's power is turned off.

Shooting

61