Copying Recordings to a Memory Card

Copying Photos from the Index Screen

Operating modes:

1Open the [Photos] index screen (A91).

• Check that you have selected the &tab (built-in memory) or 6tab (memory card 2).

2 Open the screen to copy photos.

126[Edit] >[Copy (&'7)] or [Copy (6'7)]

3Touch the desired option and then touch [Yes].

When you select [Select], perform the following procedure to select the individual photos you want to copy before touching [Yes].

Touch [Stop] to interrupt the operation while it is in progress.

The selected photos are copied.

4 Touch [OK].

To select individual photos

1Touch on the individual photos you want to copy.

A checkmark !will appear on the photos you touch. The total number of selected photos will appear next to the "icon.

Touch a selected photo to remove the checkmark. To remove all checkmarks at once, touch [Remove All] >[Yes].

2 After selecting all the desired photos, touch [ K].

Options

[Select] Select individual photos to copy. [All Photos] Copy all the photos.

IMPORTANT

Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the double memory card slot cover.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the camcorder’s operating mode.

If supported recordings are copied onto an Eye-Fi card in memory card slot 3, wireless upload will

start automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card (A136).

NOTES

In the following cases, you will not be able to copy recordings to the memory card:

-If the double memory card slot is open.

-If the LOCK switch on memory card 3is set to prevent writing.

-If there is no memory card in memory card slot 3.

Scenes that were edited using the supplied software VideoBrowser and were then transferred back to the camcorder cannot be copied to the memory card.

If there is not enough space on memory card 3, as many photos as possible will be copied before stopping the operation.