Onscreen Displays and Data Code

Onscreen Displays and Data Code

You can turn most onscreen displays on or off.

Operating modes:

Repeatedly press Dto turn the onscreen displays on/off in the following sequence:

82, mode:• All displays on• Most displays off1, mode2:• Only data code on

• All displays on

1Pressing Dwill turn off most of the icons and displays that appear automatically but will not remove control buttons ([FUNC.],

[PHOTO], etc.) and onscreen displays that were turned on manually (for example, onscreen markers or the audio level meter).

2In these modes, pressing Dhas the same effect as touching

the screen. During single photo view and while playing back a scene, the playback controls are displayed only momentarily.

About the Data Code

With every scene or photo recorded, the camcorder keeps a data code (date/time of recording, information about the camera setup, etc.).

You can select the information to be displayed with the s/ >[Data Code] setting.