Uploading Recordings to the Web

7When the conversion is completed, a confirmation screen will appear.

•Continue the procedure if you want to connect the camcorder to the computer and upload your videos immediately.

•Alternatively, you can touch [End Without Connecting] to connect the camcorder to a computer

at a later time. When you are ready to upload your movies, set the camcorder to mode and save your movies and SD movies (A127). Then, use the supplied software VideoBrowser to upload your recordings to the Web.

1348 Connect the camcorder to the computer using the supplied USB cable.

•Connection $. Refer to Connection Diagrams (A118).

9Computer: VideoBrowser will start up automatically.

•Follow the software's instructions to upload your SD movies to the Web. For details about using

the software, click to open the Software Guide (PDF file).

To select individual scenes (step 4)

1Touch on the individual scenes you want to convert.

•A checkmark !will appear on the scenes you touch. The total number of selected scenes will appear next to the "icon.

•Touch a selected scene to remove the checkmark. To remove all checkmarks at once, touch [Remove All] >[Yes].

2 After selecting all the desired scenes, touch [OK].

To select the bit rate (step 5)

Using a higher bit rate will result in better video quality for the converted scenes, while a lower bit rate will result in smaller file sizes and faster uploads.

1 Touch [w].

2 Touch [Bit Rate (Quality)].

3 Touch the desired option and then touch [K] twice.

To automatically divide scenes (step 5)

If you are converting a long scene, you can have the camcorder divide it into 10-minute SD movies to make uploading easier.

1 Touch [w].

2 Touch [Auto Divide].

3 Touch [On] and then touch [K] twice.

IMPORTANT

•While the camcorder is connected to the computer, do not open the double memory card slot cover and do not remove the memory cards.

•Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the double memory card slot cover.

-Do not disconnect the USB cable.

-Do not disconnect the compact power adapter or turn off the camcorder or the computer.