LCD Screen has been dimmed

Use the [LCD Backlight] setting to change the brightness

- Change the

>

>[LCD Backlight] setting to [Normal] or [Bright].

May not be possible to record movies on this memory card

-You may not be able to record movies on a memory card without a Speed Class rating or with one rated SD Speed Class 2. Replace the memory card with one rated SD Speed Class 4, 6 or 10.

Mem. Card Number of scenes already at maximum

-The memory card already contains the maximum number of AVCHD scenes (3,999 scenes); no further scenes can be copied onto the memory card. Delete some scenes (A56) to free some space.

Mem. Card Unable to recognize the data

-The memory card contains scenes recorded using a video configuration that is not supported (PAL or SECAM). Play back the recordings in the memory card with the device originally used to record them.

Memory card cover is open

- After inserting a memory card, close the memory card slot cover. Memory card is full

-The memory card is full. Delete some recordings (A56, 58) to free some space or replace the memory card.

Memory card is write-protected

- The LOCK switch on the memory card is set to prevent accidental erasure. Change the position of the LOCK switch.

Memory card writing error Attempt to recover the data?

- This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing to the memory. Select [Recover] to try to recover the recordings. If you inserted a memory card that contains scenes recorded using another device, we recommend that you select [No].

Need to recover files from the memory card. Change the position of the LOCK switch on the memory card.

- This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card and later the position of the card’s LOCK switch was changed to prevent erasure. Change the position of the LOCK switch.

No memory card

-Insert a compatible memory card into the camcorder (A29).

-The memory card may not be inserted correctly. Insert the memory card all the way into the memory card slot until it clicks.

6/4Not enough available space

- Delete some recordings on the memory card (A56, 58) or select [4 Mbps] for the conver- sion.

168 Š Additional Information