Wi-Fi authentication unsuccessful

-Make sure the camcorder and access point are using the same authentication/encryption method and encryption key.

-If the access point is using MAC address filtering, enter the camcorder’s MAC address in the access point’s configuration screen.

Wi-Fi cannot be used while the wireless microphone is attached

-The camcorder’s Wi-Fi functions cannot be used while the optional WM-V1 Wireless Microphone is connected to the camcorder. Disconnect the microphone from the MIC terminal and turn it off.

Wi-Fi connection terminated

-Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal. Try using the camcorder in a location farther away from such appliances.

-The camcorder may not be able to connect to the access point if too many devices are accessing it. After a short while, establish the connection again.

Wi-Fi error Incorrect authentication method

-Make sure the camcorder and access point are correctly configured.

-Make sure the camcorder and access point are using the same authentication/encryption method and encryption key.

-If the access point is using MAC address filtering, enter the camcorder’s MAC address in the access point’s configuration screen.

Wi-Fi error Incorrect encryption key

- The encryption key (password) is case sensitive so make sure to enter it correctly.

Wi-Fi error Incorrect encryption method

-Make sure the camcorder and access point are using the same authentication/encryption method.

-If the access point is using MAC address filtering, enter the camcorder’s MAC address in the access point’s configuration screen.

Wireless communication is not working correctly

-Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal. Try using the camcorder in a location farther away from such appliances.

-Turn off the camcorder and wireless router. After a short while, turn them on again and per- form the Wi-Fi network setup again. If the problem persists contact a Canon Service Center.

List of Messages for Web Services

Check network settings

-The network settings in the camcorder are not correctly configured. Check the connection point, SSID and other network settings.

172 Š Additional Information