Canon 8152B005, 8155B004 NOTES, Dividing Scenes, Operating modes:, [Edit] >[Divide], [μ Divide] >[Yes], 5 Divide the scene, 1 Play back the desired scene (A50)

Dividing Scenes

You can divide AVCHD scenes in order to leave out the best parts and later cut out the rest.

Operating modes:

SCN

1 Play back the desired scene (A50).2Touch the screen and then touch [Ý] to pause the playback.3 Open the screen for dividing scenes.[Edit] >[Divide]4Bring the scene to a precise point, if necessary.

Playback controls will appear on the screen (A52). Use any special playback modes (fast playback, frame reverse/advance) as necessary to locate the desired point.

5 Divide the scene.[μ Divide] >[Yes]

•The video from the division point to the end of the scene will appear as a new scene in the index screen.

NOTES

•When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds.

•If the scene cannot be divided at the point where you paused the play- back, advance/reverse a frame and then divide the scene.

•During the playback of a scene that was divided, you may notice some anomalies in the picture/sound at the point where the scene was cut.

•Video snapshot scenes and other scenes that are too short (less than 3 seconds) cannot be divided.

•Scenes cannot be divided within 1 second from the beginning or the end of the scene.

Advanced Playback and Editing Š 99