•After you set the shutter speed or aperture value, the exposure level may change if you adjust the zoom or recompose the shot.
•Screen brightness may change depending on your specified shutter speed or aperture value. However, screen brightness remains the same when the flash is up and the mode is set to [h].
•To have both the shutter speed and aperture value automatically adjusted to obtain standard exposure, hold the shutter button halfway and press the < > button. Note that standard exposure may not be possible with some settings.
•Images shot at high ISO speeds may look grainy.
•[D]: Manual
•Calculation of standard exposure is based on the specified metering method
(=69).
•You can customize camera operation so that turning the <7> dial adjusts the shutter speed and turning the <z> dial adjusts the aperture value (=96).
Still Images
Adjusting the Flash OutputChoose from the three flash levels in [D] mode.
1Enter [D] mode. zzSet the mode dial to [D].
2Configure the setting.
zzRaise the flash, press the <r> button and immediately turn the <z> dial to choose the flash level, and then press the <m> button.
zzOnce the setting is complete, the flash output level is displayed.
[ ]: low, [ ]: medium, []: high
• You can also set the flash level by choosing [X] in the FUNC. menu (=24), or by accessing MENU (=25) and choosing [4] tab ► [Flash Control] ► [Flash Output].
•You can set the flash level in [M] or [B] mode by accessing MENU (=25) and choosing [4] tab ► [Flash Control] ► [Flash Mode] ►
[Manual].
•You can also access the
(except when an optional external flash is mounted).
-Press and hold the <r> button for at least one second.
-When the flash is up, press the <r> button and immediately press the <n> button.
Cover
Before Use
Common Camera Operations
Basic Guide
Advanced Guide
1 | Camera Basics |
2 | Auto Mode / |
Hybrid Auto Mode | |
3 | Other Shooting |
Modes | |
4 P Mode | |
| Tv, Av, M, C1, |
5 and C2 Mode | |
6 | Playback Mode |
7 | |
8 | Setting Menu |
9 | Accessories |
10 | Appendix |
Index
94