1Choose [Select].
zzFollowing step 2 in “Choosing a Selection Method” (=111), choose [Select] and press the <m> button.
2 Choose an image.
zzPress the <q><r> buttons or turn the <7> dial to choose an image, and then press the <m> button. [] is displayed.
zzTo cancel selection, press the <m> button again. [] is no longer displayed.
zzRepeat this process to specify other images.
3Protect the image. zzPress the <n> button. A
confirmation message is displayed.
zzPress the <q><r> buttons or turn the <7> dial to choose [OK], and then press the <m> button.
•Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
1Choose [Select Range].
zzFollowing step 2 in “Choosing a Selection Method” (=111), choose [Select Range] and press the <m> button.
2Choose a starting image. zzPress the <m> button.
zzPress the <q><r> buttons or turn the <7> dial to choose an image, and then press the <m> button.
3Choose an ending image. zzPress the <r> button to choose [Last
image], and then press the <m> button.
Cover
Before Use
Common Camera Operations
Basic Guide
Advanced Guide
1 | Camera Basics |
2 | Auto Mode / |
Hybrid Auto Mode | |
3 | Other Shooting |
Modes | |
4 P Mode | |
| Tv, Av, M, C1, |
5 and C2 Mode | |
6 | Playback Mode |
7 | |
8 | Setting Menu |
9 | Accessories |
10 | Appendix |
Index
112