Choosing Images Individually
1Choose [Select].
zzFollowing step 2 in “Choosing a Selection Method” (=114), choose [Select] and press the <m> button.
2Choose an image.
zzOnce you choose an image following step 2 in “Choosing Images Individually” (=112), [
] is displayed.
zzTo cancel selection, press the <m> button again. [
] is no longer displayed.
zzRepeat this process to specify other images.
3Erase the image.
zzPress the <n> button. A confirmation message is displayed.
zzPress the <q><r> buttons or turn the <7> dial to choose [OK], and then press the <m> button.
Selecting a Range 1 Choose [Select Range].
zzFollowing step 2 in “Choosing a Selection Method” (=114), choose [Select Range] and press the <m> button.
2Choose images.
zzFollow steps 2 – 3 in “Selecting a Range” (=112) to specify images.
3Erase the images.
zzPress the <p> button to choose [Erase], and then press the <m> button.
Specifying All Images at Once
1Choose [Select All Images]. zzFollowing step 2 in “Choosing a Selection
Method” (=114), choose [Select All
Images] and press the <m> button.
2Erase the images.
zzPress the <q><r> buttons or turn the <7> dial to choose [OK], and then press the <m> button.
Cover
Before Use
Common Camera Operations
Basic Guide
Advanced Guide
1 | Camera Basics |
2 | Auto Mode / |
Hybrid Auto Mode | |
3 | Other Shooting |
Modes | |
4 P Mode | |
| Tv, Av, M, C1, |
5 and C2 Mode | |
6 | Playback Mode |
7 | |
8 | Setting Menu |
9 | Accessories |
10 | Appendix |
Index
115