Trouble?

-Remove the battery pack and insert it correctly. Abnormal characters appear on the screen and the cam- corder does not operate properly.

-Remove the battery pack and insert it after a few moments. Video noise appears on screen.

-Keep a distance between the camcorder and devices that

emit strong electromagnetic fields (plasma TVs, cellular phones, etc.).

Horizontal bands appear on the screen.

-This is a phenomenon typical of CMOS image sensors when recording under some types of fluorescent, mercury or sodium lamps. This is not a malfunction. To reduce the

symptoms, change the 1>p>[Flicker Reduction] setting.

Sound is distorted or is recorded at lower levels.

-When recording near loud sounds (such as fireworks, shows or concerts), sound may become distorted or it may not be recorded at the actual levels. This is not a malfunction.

The picture is displayed correctly but there is no sound from the built-in speaker.

-Speaker volume is turned off. Adjust the volume (A67).

-If the optional HTC-100 High Speed HDMI Cable is con- nected to the camcorder, disconnect it.

205