Page |
|
|
2 | 2.2.2 | Printing area |
2 | 2.3 Interface Specifications | |
2 | 2.3.1 | Parallel interface |
2 | 2.3.2 | Serial interface |
Part 3: OPERATING INSTRUCTIONS
3 - 1 | 1. PRINTER SETUP | |||
3 - 1 | 1.1 | Unpacking | ||
3 - | 3 | 1.2 | Installation Space | |
3 - | 4 | 1.3 | Installation Procedure | |
3 - | 4 |
| 1.3.1 Connecting the interface cable | |
3 - 4 |
| 1.3.2 Connecting the power supply | ||
3 - | 5 |
| 1.3.3 | Installing BJ cartridges |
3 - | 8 |
| 1.3.4 | Replacing ink tanks |
3 - | 9 |
| 1.3.5 BJ cartridge container | |
3 | 1.4 | Turning the Printer ON/OFF | ||
3 |
| 1.4.1 Turning the printer on | ||
3 |
| 1.4.2 Turning the printer off | ||
3 | 1.5 | Paper Settings | ||
3 | 1.6 | Names and Functions of Parts | ||
3 | 2. TRANSPORTING THE PRINTER | |||
3 | 2.1 | Transporting the Printer | ||
3 | 2.2 | Capping Lock/Unlock | ||
3 | 3. PRINTER SERVICING FUNCTIONS | |||
3 | 3.1 | Error Indications | ||
3 |
| 3.1.1 | Operator call | |
3 |
| 3.1.2 | Service call | |
3 | 3.2 | Warning Display | ||
3 | 3.3 | Function Settings | ||
3 |
| 3.3.1 | Maintenance settable items | |
3 |
| 3.3.2 | Custom setting | |
3 | 3.4 | Control Buttons | ||
3 |
| 3.4.1 Cleaning the BJ cartridges | ||
3 |
| 3.4.2 | Service mode | |
3 | 3.5 | Self Test Print (Nozzle Check Pattern) | ||
3 | 3.6 | EEPROM | ||
3 |
| 3.6.1 | Continued use of EEPROM memory data | |
3 |
| 3.6.2 | Resetting the EEPROM | |
3 |
| 3.6.3 | EEPROM list print | |
3 |
| 3.6.4 | Destination setting |
Part 4: TECHNICAL REFERENCE
4 - 1 | 1. OVERVIEW | |||
4 - 1 | 1.1 | Printer Block Diagram | ||
4 - | 2 | 1.2 | Initial Flowchart | |
4 - 5 | 1.3 | Power OFF Operation Flow | ||
4 - | 6 | 1.4 | Print Signal Flow | |
4 - | 7 | 1.5 | BJ Cartridge Drive | |
4 - | 7 |
| 1.5.1 | Printing drive control |
4 - 8 | 2. FIRMWARE | |||
4 - | 8 | 2.1 | Interface | |
4 - 8 |
| 2.1.1 | Nibble mode | |
4 - 9 |
| 2.1.2 | ECP mode |
III