3.BURNER ADJUSTMENT: The Jøtul GF 600 DV Firelight gas stove is equipped with a variable gas control valve that provides easy adjustment of the flame height, appearance, and heat output. To adjust the flame between the HI and LOW setting, rotate the HI/LOW knob, located in the center of the valve face. Flame height will adjust approximately 1.0” to 1.5” between the LOW and HIGH settings. See Fig. 24.

NO SMOKE OR SOOT SHOULD BE PRESENT. CHECK LOG PLACEMENT IF ANY SOOT OR SMOKE IS DETECTED. IF SOOT OR SMOKE PERSISTS, THE AIR SHUTTER MAY NEED TO BE ADJUSTED.

See Air Shutter/Flame Appearance section of this manual for proper air shutter settings and adjustments. Note: the more offsets there are in the vent system, the greater the need for an air shutter adjustment. See page 19.

WARNING:

AIR SHUTTER ADJUSTMENTS SHOULD ONLY BE PERFORMED BY A QUALIFIED PROFESSIONAL SERVICE TECHNICIAN.

CAUTION:

DO NOT ATTEMPT TO ALTER THE FLAME APPEARANCE BY POSITIONING THE GAS VALVE IN ANY OTHER POSITION OTHER THAN THE FULL “ON” POSITION.

5” 4”

4”

Figure 24. Flame appearance on the “high” setting after approximately 15 to 20 minutes operation.

Optional Blower Kit Installation

1.Unpack the blower kit. Use a 10mm wrench to remove the Mounting Bracket from the Blower. Keep the nuts and tooth washers for reassembly.

2.Attach the Snapstat to the Snapstat Retainer using two #7 x 3/8” phillips screws supplied. See fig. 25.

3.Attach the Snapstat Retainer to the Mounting Bracket using the remaining two #7 x 3/8” phillips screws as in fig. 25.

4.Locate the two raised bosses on the bottom back of the stove. The blower is mounted to the stove using these two threaded holes.

5.Use the two M6 x12 mm hex head flange bolts to attach the Mounting Bracket to the base of the stove. Orient the bracket with the Snapstat toward the front of the stove and align the two MIDDLE mounting holes on the bracket with the two threaded holes on the bottom back of the stove.

6.Position the blower with the junction box to the REAR of the stove and insert the two threaded studs on the blower through the rear-most holes in the blower bracket. Attach the blower to the bracket using the nuts and washers previously removed. See fig. 26.

7.Attach either black and white wire from the blower to either Snapstat terminal.

Snapstat

Snapstat Retainer

Blower Attachment

Stove Attachment

Mounting

Bracket

Figure 25. Snapstat / Blower Mounting Bracket assembly.

WARNING:

The blower is equipped with a three-prong (ground- ing) plug for protection against shock hazard and must be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from the plug.

22

Page 22
Image 22
Jotul GF 600 DV manual Optional Blower Kit Installation, Snapstat / Blower Mounting Bracket assembly

GF 600 DV specifications

The Jotul GF 600 DV is a distinctive gas fireplace that seamlessly combines luxury with functionality, making it a popular choice for homeowners seeking both style and warmth. As part of the well-regarded Jotul line, this model is designed with an emphasis on efficiency and aesthetic appeal, catering to varied interior designs from contemporary to traditional.

One of the main features of the Jotul GF 600 DV is its impressive heating capacity. With the ability to produce up to 30,000 BTUs, it efficiently warms spaces up to 1,500 square feet, making it ideal for living rooms, dens, or any area in need of supplemental heat. The fireplace operates on natural gas or propane, allowing homeowners flexibility in fuel choice based on availability and preference.

The GF 600 DV boasts a striking design, featuring a large glass front that offers an unobstructed view of the mesmerizing flames. This model is available in several finishes, including cast iron, which not only enhances durability but also retains heat longer, thus improving heating efficiency. The realistic gas logs add to the authenticity of the fire experience, while the flame control allows users to adjust the fire’s intensity with ease, creating the perfect ambiance for any occasion.

In terms of technology, the Jotul GF 600 DV is built with advanced burner systems that provide a realistic flame pattern and efficient combustion. The model operates with direct vent technology, which ensures that the fireplace draws air from the outside for combustion, thereby eliminating any risk of indoor air contamination. This feature also enhances energy efficiency, as the fireplace can efficiently maintain indoor temperatures without drawing heated air out of the home.

Another significant characteristic of the Jotul GF 600 DV is its ease of installation and operation. The unit can be installed in various types of framing and can be vented vertically or horizontally to accommodate different house designs. Additionally, it can be complemented with optional remote controls or wall thermostats, providing convenience and greater control over heating and comfort levels without manual adjustments.

Safety is also a key consideration in the design of the Jotul GF 600 DV. It includes features such as an automatic shut-off mechanism that activates in case of malfunction or irregular operation. This commitment to safety ensures peace of mind for users and their families.

In summary, the Jotul GF 600 DV is not only a functional heating solution but also a stylish addition to any home. With its blend of advanced technology, efficiency, and aesthetic qualities, it exemplifies modern fireplace design, meeting the needs of contemporary living while ensuring warmth and comfort throughout the colder months.