Gas Conversion Procedure

All numbers in ( ) refer to the exploded view on page 25 of this manual.

1.Turn off gas supply to the stove.

2.Remove the top griddle (7).

3.Locate the two set screws near the top of each side casting (3, 8). Using a 3mm allen wrench thread the set screws out. Lift off the top panel of the stove (6).

4.Open the front doors of the stove using the stove tool.

5.Release the glass clips (17) atop the firebox (22) and slowly lift glass assembly (16) up and out.

6.Remove the four logs (36) using care not to scratch or damage the logs.

7.Using a 1/4” nut driver remove the two hex head screws that secure the air divider (21) to the front log support (18) and lift out of the firebox (22). See Figure 12.

Burner

Front Log

Air

Support

Divider

Tube

 

 

Figure 12. Remove the Air Divider and Log Support.

8.Shift the burner tube (19) to the right and lift out. Note: There are no screws securing the burner tube to the floor of the firebox. Simply lift the rear of the tube slightly and then lift the entire tube.

9.Change the main burner orifice. Using a ½” open ended wrench or deep-well socket remove the burner orifice from the brass orifice holder. Replace with the appropriate orifice supplied in the kit.

3.3mm for NG

#48 for LP

10.Adjust the air shutter on the burner tube (19) to allow for the proper mixing of air and gas. See Fig. 13.

1/2” open for natural 7/8” open for propane

AIR SHUTTER

BURNER TUBE

ATTENTION: Air shutter should never be

LESS than 1/8” open.

Figure 13. Air shutter adjustment.

11.Change the Pilot Orifice. From within the firebox, pull the pilot hood off the pilot assembly. See Fig. 14. Using the 4 mm allen wrench in- cluded with the conversion kit, remove the original pilot orifice (counterclockwise). Replace with the appropriate orifice:

#51 for natural gas #30 for propane

12.Tighten orifice into the base of the pilot assem- bly. Be sure the orifice is tightly secured to prevent bypass leakage. Replace pilot hood onto the pilot assembly.

Pilot Head

Pilot Orifice

Figure 14. Remove pilot head and pilot orifice.

15

Page 15
Image 15
Jotul GF 600 DV manual Gas Conversion Procedure, Mm for NG #48 for LP

GF 600 DV specifications

The Jotul GF 600 DV is a distinctive gas fireplace that seamlessly combines luxury with functionality, making it a popular choice for homeowners seeking both style and warmth. As part of the well-regarded Jotul line, this model is designed with an emphasis on efficiency and aesthetic appeal, catering to varied interior designs from contemporary to traditional.

One of the main features of the Jotul GF 600 DV is its impressive heating capacity. With the ability to produce up to 30,000 BTUs, it efficiently warms spaces up to 1,500 square feet, making it ideal for living rooms, dens, or any area in need of supplemental heat. The fireplace operates on natural gas or propane, allowing homeowners flexibility in fuel choice based on availability and preference.

The GF 600 DV boasts a striking design, featuring a large glass front that offers an unobstructed view of the mesmerizing flames. This model is available in several finishes, including cast iron, which not only enhances durability but also retains heat longer, thus improving heating efficiency. The realistic gas logs add to the authenticity of the fire experience, while the flame control allows users to adjust the fire’s intensity with ease, creating the perfect ambiance for any occasion.

In terms of technology, the Jotul GF 600 DV is built with advanced burner systems that provide a realistic flame pattern and efficient combustion. The model operates with direct vent technology, which ensures that the fireplace draws air from the outside for combustion, thereby eliminating any risk of indoor air contamination. This feature also enhances energy efficiency, as the fireplace can efficiently maintain indoor temperatures without drawing heated air out of the home.

Another significant characteristic of the Jotul GF 600 DV is its ease of installation and operation. The unit can be installed in various types of framing and can be vented vertically or horizontally to accommodate different house designs. Additionally, it can be complemented with optional remote controls or wall thermostats, providing convenience and greater control over heating and comfort levels without manual adjustments.

Safety is also a key consideration in the design of the Jotul GF 600 DV. It includes features such as an automatic shut-off mechanism that activates in case of malfunction or irregular operation. This commitment to safety ensures peace of mind for users and their families.

In summary, the Jotul GF 600 DV is not only a functional heating solution but also a stylish addition to any home. With its blend of advanced technology, efficiency, and aesthetic qualities, it exemplifies modern fireplace design, meeting the needs of contemporary living while ensuring warmth and comfort throughout the colder months.