PILOT ASSEMBLY

LIGHTING INSTRUCTIONS

FOR YOUR SAFETY, READ BEFORE LIGHTING.

WARNING:

IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY

RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR LOSS OF LIFE.

A. This appliance has a pilot which must be lit by hand. When lighting the pilot, follow these instructions exactly.

B. BEFORE LIGHTING, smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle to the floor.

WHAT TO DO IF YOU SMELL GAS:

Extinguish any open flame.

Open windows.

Do not light any appliance.

Do not touch any electrical switches.

Do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone.

If your gas supplier cannot be reached, call the fire department.

C. Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it. Call a qualified technician. Force or attempted repair may result in a fire or explosion.

D. Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

1.STOP! Read the safety information above.

2.Access the lower controls.

3.Turn the stove ON/OFF switch to “OFF”, or set the thermostat to lowest setting (if used).

4.Confirm that the gas supply line shut-off valve is open.

Control

 

 

Knob

PILOT

ON

 

OFF

 

 

CONTROL VALVE

5.Push in gas control knob slightly and turn clockwise to “OFF”.

NOTE: Knob cannot be turned from “PILOT” to “OFF” unless the knob is pushed in slightly. Do not force.

6.Wait five (5) minutes to clear out any gas. If you then smell gas, STOP! Follow “B” in the safety information above on this page. If you do not smell gas, go to the

next step.

7.Push in gas control knob slightly and turn counter- clockwiseto “PILOT”.

8.Push in control knob all the way and hold in. Immediately light the pilot by triggering the spark ignitor (push the red button repeatedly) until pilot lights. Continue to hold the control knob in for about one minute after the pilot lights. Release

knob and it should spring back. The pilot should remain

lit. If it goes out, repeat Steps 5 through 8.

• If knob does not return when re-

leased, stop and immediately call your service technician or gas supplier.

• If pilot will not stay lit after several tries, turn the control knob to OFF and call your service technician or gas supplier.

9.Turn gas control knob counterclockwise to “ON”.

10.Turn the stove ON/OFF switch to “ON”, or set thermostat (if used) to desired temperature.

TO TURN OFF GAS TO THE APPLIANCE:

1.Turn ON/OFF switch to” OFF”. The pilot will remain lit for normal service.

2.For complete shutdown, turn ON/OFF switch to “OFF”.

3.Access the lower controls.

4.Depress gas control knob slightly and turn

clockwise to “OFF”. Do not force.

27

Page 27
Image 27
Jotul GF 600 DV manual Lighting Instructions

GF 600 DV specifications

The Jotul GF 600 DV is a distinctive gas fireplace that seamlessly combines luxury with functionality, making it a popular choice for homeowners seeking both style and warmth. As part of the well-regarded Jotul line, this model is designed with an emphasis on efficiency and aesthetic appeal, catering to varied interior designs from contemporary to traditional.

One of the main features of the Jotul GF 600 DV is its impressive heating capacity. With the ability to produce up to 30,000 BTUs, it efficiently warms spaces up to 1,500 square feet, making it ideal for living rooms, dens, or any area in need of supplemental heat. The fireplace operates on natural gas or propane, allowing homeowners flexibility in fuel choice based on availability and preference.

The GF 600 DV boasts a striking design, featuring a large glass front that offers an unobstructed view of the mesmerizing flames. This model is available in several finishes, including cast iron, which not only enhances durability but also retains heat longer, thus improving heating efficiency. The realistic gas logs add to the authenticity of the fire experience, while the flame control allows users to adjust the fire’s intensity with ease, creating the perfect ambiance for any occasion.

In terms of technology, the Jotul GF 600 DV is built with advanced burner systems that provide a realistic flame pattern and efficient combustion. The model operates with direct vent technology, which ensures that the fireplace draws air from the outside for combustion, thereby eliminating any risk of indoor air contamination. This feature also enhances energy efficiency, as the fireplace can efficiently maintain indoor temperatures without drawing heated air out of the home.

Another significant characteristic of the Jotul GF 600 DV is its ease of installation and operation. The unit can be installed in various types of framing and can be vented vertically or horizontally to accommodate different house designs. Additionally, it can be complemented with optional remote controls or wall thermostats, providing convenience and greater control over heating and comfort levels without manual adjustments.

Safety is also a key consideration in the design of the Jotul GF 600 DV. It includes features such as an automatic shut-off mechanism that activates in case of malfunction or irregular operation. This commitment to safety ensures peace of mind for users and their families.

In summary, the Jotul GF 600 DV is not only a functional heating solution but also a stylish addition to any home. With its blend of advanced technology, efficiency, and aesthetic qualities, it exemplifies modern fireplace design, meeting the needs of contemporary living while ensuring warmth and comfort throughout the colder months.