Optional Controls, System Check, Wall Thermostat

Optional Controls

Wall Thermostat

Use only a 750 millivolt DC two-wire circuit ther- mostat, placed in the same room as the heater, typically 5’ off the floor. Avoid drafty areas or any area that may affect the accuracy of the thermo- stat.

The thermostat should be connected to the stove using a minimum of 16 gauge wire with a maximum length of 35 feet of wire.

Connect the two thermostat wire leads to the two lower terminals on the terminal block located ont the valve. Do not overtighten the connections.

IT IS NOT NECESSARY TO DISCONNECT ANY OTHER WIRES. See Fig. 22.

At the thermostat, the two wires should be connected to the two connection screws on the thermostat base plate per the manufacturer’s instructions.

For thermostatic operation, the On/Off/T-Stat switch must be in the T-stat position, and the pilot light must be on.

Remote Control

When using a remote, the remote receiver should be wired to the terminal block the same way the thermostat would be. See the instructions above.

Follow the operating instructions included with the Remote Control unit.

CAUTION:

LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING THE CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER OR DANGER- OUS OPERATION. ALWAYS VERIFY PROPER OPERATION AFTER SERVICING THE APPLI- ANCE.

System Check

1.PURGING THE GAS LINE: When lighting the appliance for the first time, it will take a few moments to clear the gas line of air. Once this purge is complete, the appliance will operate as described in the lighting instructions. See the inside back cover of this manual or the stove Rating Plate attached the bottom of the stove. All subsequent lightings of the stove will not require purging the gas line unless the supply line is shut off.

2.PILOT FLAME: The pilot flame should be steady - not lifting or floating. The flame should be blue in color around the pilot hood, with traces of yellow toward the outer edges.

The pilot flame should engulf the top 3/8” of the thermopile (to generate millivolt current) and the top 1/8” of the thermocouple. The pilot flame should project out of the pilot hood 1” at all three ports. See Figs. 23.

	1”
	(25mm)	3/8”
1/8”		3/8”
1/8”		(8mm)
(3mm)		Min.
Min.

Figure 23. Correct pilot flame appearance.

THERMOPILE

VALVE

TERMINAL

BLOCK

ROCKER

SWITCH

OFF

STAT

OPTIONAL

THERMOSTAT

REMOTE

CONTROL

Figure 22. Accessory wiring diagram.

GF 600 DV specifications

The Jotul GF 600 DV is a distinctive gas fireplace that seamlessly combines luxury with functionality, making it a popular choice for homeowners seeking both style and warmth. As part of the well-regarded Jotul line, this model is designed with an emphasis on efficiency and aesthetic appeal, catering to varied interior designs from contemporary to traditional.

One of the main features of the Jotul GF 600 DV is its impressive heating capacity. With the ability to produce up to 30,000 BTUs, it efficiently warms spaces up to 1,500 square feet, making it ideal for living rooms, dens, or any area in need of supplemental heat. The fireplace operates on natural gas or propane, allowing homeowners flexibility in fuel choice based on availability and preference.

The GF 600 DV boasts a striking design, featuring a large glass front that offers an unobstructed view of the mesmerizing flames. This model is available in several finishes, including cast iron, which not only enhances durability but also retains heat longer, thus improving heating efficiency. The realistic gas logs add to the authenticity of the fire experience, while the flame control allows users to adjust the fire’s intensity with ease, creating the perfect ambiance for any occasion.

In terms of technology, the Jotul GF 600 DV is built with advanced burner systems that provide a realistic flame pattern and efficient combustion. The model operates with direct vent technology, which ensures that the fireplace draws air from the outside for combustion, thereby eliminating any risk of indoor air contamination. This feature also enhances energy efficiency, as the fireplace can efficiently maintain indoor temperatures without drawing heated air out of the home.

Another significant characteristic of the Jotul GF 600 DV is its ease of installation and operation. The unit can be installed in various types of framing and can be vented vertically or horizontally to accommodate different house designs. Additionally, it can be complemented with optional remote controls or wall thermostats, providing convenience and greater control over heating and comfort levels without manual adjustments.

Safety is also a key consideration in the design of the Jotul GF 600 DV. It includes features such as an automatic shut-off mechanism that activates in case of malfunction or irregular operation. This commitment to safety ensures peace of mind for users and their families.

In summary, the Jotul GF 600 DV is not only a functional heating solution but also a stylish addition to any home. With its blend of advanced technology, efficiency, and aesthetic qualities, it exemplifies modern fireplace design, meeting the needs of contemporary living while ensuring warmth and comfort throughout the colder months.

Jotul GF 600 DV manual Optional Controls, System Check, Wall Thermostat, Remote Control

Models: GF 600 DV