wPrinting
Cropping the Image
Tilt correction
You can crop the image and print only the cropped portion as if the image was recomposed.
Set the cropping right before printing. If you set the cropping and then set the print settings, you may have to set the cropping again before printing.
1On the print settings screen, select [Cropping].
2Set the cropping frame size, position, and aspect ratio.
The image area within the cropping frame will be printed. The cropping frame’s aspect ratio can be changed with [Paper settings].
Changing the cropping frame size
When you press the <u> or <Hy> button, the size of the cropping frame will change. The smaller the cropping frame, the larger the image magnification will be for printing.
Moving the cropping frame
Press the <S> key to move the frame over the image vertically or horizontally. Move the cropping frame until it covers the desired image area.
Rotating the frame
Pressing the <B> button will toggle the cropping frame between the vertical and horizontal orientations. This enables you to create a vertically oriented print from a horizontal image.
Image tilt correction
By turning the <6> dial, you can adjust the image tilt angle up to ±10 degrees in
3Press <0> to exit the cropping.
XThe print settings screen will reappear.
You can check the cropped image area on the upper left of the print settings screen.
287