Error number
Countermeasures
If there is a problem with the camera, an error message will appear. Follow the on- screen instructions.
Number | Error Message and Solution |
|
|
Communications between the camera and lens is faulty. Clean the lens contacts.
01
ÎClean the electrical contacts on the camera and lens or use a Canon lens (p.17, 20).
Card cannot be accessed. Reinsert/change card or format card with camera.
02
ÎRemove and insert the card again, replace the card, or format the card (p.31, 48).
Cannot save images because card is full. Replace card.
04ÎReplace the card, erase unnecessary images, or format the card (p.31, 268, 48).
The
05again.
ÎOperate the power switch (p.34).
Sensor cleaning is not possible. Turn the camera off and on
06again.
ÎOperate the power switch (p.34).
10, 20, Shooting is not possible due to an error. Turn the camera off and 30, 40, on again or
50, 60,
70, 80, ÎOperate the power switch, remove and install the battery pack
99 again, or use a Canon lens (p.34, 30).
*If the error still persists, write down the error number and contact your nearest Canon Service Center.
337