106

 

 

 

2 Press the

 

button.

 

 

The camera will switch to Color Input

mode and the display will alternate

between the original image and the

color swap image (using the

previously set color).

3 Aim the camera so that the original color appears at the center of the LCD monitor and press the button.

Only one color can be specified.

You can use the or button to specify the range of colors that are swapped.

–5: Only takes the color that you want to swap

+5: Also takes colors close to the one that you want to swap

4 Aim the camera so that the desired color appears at the center of the LCD monitor and press the button.

Only one color can be specified.

5 Press the button to complete the setting, then shoot.

z The default setting for Color Swap mode changes green into white.

z You may not obtain the expected results if you use the flash.

zThe colors specified in the Color Swap mode and the color range are retained even if the camera’s power is turned off.

Page 108
Image 108
Canon 85IS manual 106, Color swap image using, Only one color can be specified