Switching to the Registered AF Point

Normally, you press the <P> button and <S> button simultaneously to switch to the registered AF point. However, with C.Fn-18-1/2 (p.153), you can just press the <P> button to switch to the registered AF point. Set Custom Functions with 3<n>.

(1) Press the <P> button and <S> button simultaneously.

¡This is the default method.

(2) Press only the <P> button to switch to the registered AF point.

C.Fn-18-1 (p.153)

(3) Switch to the registered AF point only while pressing the <P> button.

C.Fn-18-2 (p.153)

¡When you release the <P> button, the camera will return to the original AF point.

¡ If you set or cancel C.Fn-13, the center AF point will become the registered AF point. This does not apply if you change C.Fn-13-1 to C.Fn- 13-2 or vice versa.

¡If C.Fn-18-1/2 and C.Fn-04-1/3 are also set, you can just press the <P> button to switch to the registered AF point and activate the autofocus at the same time.

71