Using a Household Power Outlet

With DC Coupler Kit DCK-E1, you can connect the camera to a household power outlet and not worry about the battery level.

1 Insert the DC Coupler.

¡Insert the coupler and while pushing it in, turn the release handle as shown by the arrow.

2

3

Connect the DC plug.

Connect the power cord.

¡After you finish using the camera, set the <4> switch to <2> and disconnect the plug from the power outlet.

¡The DC Coupler is not water-resistant, so do not get it wet when using it outdoors.

¡When the <4> switch is set to <1>, do not disconnect the DC plug or AC adapter’s power cord from the power outlet. Otherwise, the camera may stop operating. If the camera stops operating, remove the DC Coupler from the camera and reinstall it.

22