Dishwasher installation
6. Adjusting the door springs.
The door springs are adjusted correctly when a half opened door remains in that position when released.
If the door drops down, the spring ten- sion needs to be increased.
If the door closes, the spring tension needs to decreased.
The adjusting screw is located in the upper front strip, on the left hand side of the dishwasher.
Open the dishwasher door.
Adjust the door springs to the cor- rect balance by using a TORX screw- driver:
–turn clockwise to increase the tension
–turn counterclockwise to decrease the tension.
7.Securing the dishwasher to the countertop.
To ensure the stability of the dish- washer, it must be attached to the countertop after it has been positioned.
Insert one mounting bracket into each of the slots located at the left and right side of the machine top.
Push the machine into its recess and if necessary, raise the dishwasher by extending the feet until it just touches the underside of the counter- top.
If a steam deflector is installed under the countertop, the bracket holes must align with the slots in the deflector.
59
