Water softener
To set the water softener
Setting the water softener for a hard- ness level of 1 - 35 gr/gal:
Turn the dishwasher off.
Use a screwdriver to remove the lid of the water hardness level selector in the wash cabinet.
Check that the selector is set to 6 (factory setting). If not, use a flat blade screwdriver to turn the selec- tor until it clicks on setting 6.
Press the "+" and "START/Stop" but- tons while simultaneously turning the dishwasher ON.
"P" and a number will appear in the time display.
Press the "NORMAL 55 °C/130 °F" program button.
Avalue corresponding to the curren- tly set water hardness level will ap- pear in the display.
Press the "Top Solo" button as often as necessary until the hardness of your water in gr/gal appears in the display.
Example:
For a water hardness of 30 gr/gal.
Keep pressing the "Top Solo" button until "30" appears in the display.
Once "36" is reached, the display will re- turn to "1".
Press the “START/Stop” button.
“SP” appears in the display.
Press the “START/Stop” button again.
The water hardness value is now stored in the machines memory.
16
