Dishwasher installation
The “i” model dishwasher is specially designed for installation under a con- tinuous countertop.
A panel can be custom made for instal- lation on the front of the dishwasher, as- suring a perfect match with the kitchen cabinetry.
If a standard
To ensure stability, these dish- washers should only be installed under a continuous countertop which is securely fastened to the cabinet base units.
Dimensions: |
| |
1) with | 35" | (890 mm) machine height |
2) with 33 1/8" (840 mm) machine height
Range of adjustment is approximately 2" (5 cm).
1.Installing the steam deflector, (if applicable).
A stainless steel plate is supplied to protect the underside of the countertop against steam rising from the dish- washer when the door is opened. If the countertop is made of Corian®, gra- nite, marble or other solid, waterproof material, the steam deflector should not be used.
Squeeze a bead of sealant from the supplied tube into the angle formed by the curved edge b of the cover- plate.
Align the plate c with the lower front edge of the countertop (see illustra- tion) and use the supplied tacks to nail it in place.
On countertops with wood or lami- nate edging, the tacks should be nailed through the rear holes of the plate.
51
