Operating the dishwasher
Time display (19)
When the “Time left” indicator is on, the display is showing the time remaining in the wash program.
When starting a program, the “Time left” can vary, even if the identical pro- gram has been run before.
The calculated time is partially depend- ent on the temperature of the intake water. When the dishwasher is turned on for the first time, the time shown as- sumes an intake temperature of 60 °F (15 °C).
For each subsequent program, the ac- tual temperature of the previous pro- grams intake water is used in the “Time left” calculation. Due to this continuous updating, the “Time left” can vary, even for the same program.
End of a program
When a program is finished, all the se- quence indicator lamps (15) will be off, and “0” will be shown in the time dis- play.
The program indicator lamp (17) and the lamps for any additional features se- lected (e.g. Top Solo) will remain lit until the door is opened.
The dishwasher can be unloaded as soon as the “0” appears in the display (see Unloading the Dishwasher).
If the dishes are not needed immediate- ly however, leaving the door closed while “0” is displayed will allow the fan to run for a few more minutes and en- sure thorough drying.
Turning off the dishwasher
At the end of a program:
Press the “ON/OFF” button (16).
If the dishwasher is not to be used for an extended period (e.g. while on vaca- tion), it is recommended that the water supply valve be shut off.
Your Miele dishwasher is designed to shut off the water flow and drain the machine in the rare event of a valve failure. In order for this function to be active, the door must be shut and the machine must be “ON”.
33
