Miele G 890 manual Operating the dishwasher, Interrupting a program, Changing a program

Operating the dishwasher

Interrupting a program

A program can be interrupted by open- ing the door.

If the door is then closed, the program will continue from the point it was at be- fore the door was opened.

Warning!

The water in the dishwasher may be hot, and steam may be present! Only open the door if absolutely necessary and exercise extreme caution when doing so. The danger of burns and scalding exists. Once the door has been opened, allow 20-30 seconds for the inter- nal temperature to equalize before closing it again, and make sure it clicks into place.

Changing a program

If the “START/Stop” button has not yet been pushed:

Select the new program.

Select any additional features (e.g. “Delay start” or “Top Solo”) desired.

Press the “START/Stop” button (22).

The indicator lamp next to the “START/ Stop” button will go out and the pro- gram will start.

If the program is already running:

Press the “START/Stop” button (22) for at least one second.

The indicator lamp next to the Program Selection Button and the decimal point in the Time display will light.

Select the new program.

Select any additional features (e.g. “Delay start” or “Top solo” desired.

Press the “START/Stop” button (22).

The indicator lamp next to the “START/ Stop” button will go out and the new program will begin.

34